SSU2-50B SHOWROOM CONDITIONER

OVERVIEW

SSU2-50B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery.

SSU2-50B can be used with any 12V automotive battery including AGM, GEL and Lithium (LiFePO4).

When the battery is charged the SSU is a regulated power supply to sustain accessory loads and offset parasitic drain.

This low profile (3.5”) battery conditioner has been designed specifically for car showrooms.

Most conventional battery conditioners simply trickle charge the battery after it has been drained. The SSU2-50B provides instant support to the battery negating the need for recharging.

With the SSU2-50B showroom conditioner connected to your vehicles you can be sure that they are always ready for demonstration and that the battery will be kept in prime condition.

This unit has been designed to slip under most vehicles without scratching the floor surface and features automatic current sensing so that it knows when it is needed.

Compatible with LiFeP04 with 12V Lithium – All technologies

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

Comes with 8ft C15 to 5-15P power cord, as well as 1 x 15ft (4.5M) SSU2-50 Extension, 1 x 16” JLR Blade and 1 x 15” BSU Clip.

FEATURES
The intelligent sensing in the SSU2-50B determines exactly when support is required to minimize unnecessary noise and power consumption.

Battery state detection, ensuring safe prolonged use.

Output current display.

Reverse polarity protection.

Disconnect detection.

Supplied with 5m extension lead (SSU-EXT), jump start clamp leads (JLR-BLADE) and clamps for JLR Discovery Sport and Evoque (BSU-CLIP)

SPECIFICATION
INPUT: 100-240v AC
50/60Hz

WEIGHT: 13.2lb

SIZE: 11”x7.5”x3.5”

CARTON: 15.7”x15.7”x7.8”

OUTPUT: 13.4v up to 50A continuous