CDU1 STARTER KIT

OVERVIEW

This is a complementary product to the MPL50/MPL50-Li charger that manages charging of a bank of up to 5 batteries.

It can be either placed under the MPL50/MPL50-Li charger or situated remotely by use of optional link lead.

Power is provided from the MPL50/MPL50-Li. When a battery is disconnected the unit will turn off power to the output making the leads safe from accidental shorts.

The 5 output connectors are compatible with Traction standard yellow 50 Amp lead sets.

The module input is a red 50 Amp connector. A yellow to red interface lead is provided ensuring correct connection.

The status of each channel is indicated by an LED above each connector.

Units can be daisy-chained allowing up to 17 batteries to be connected simultaneously.

Compatible with LiFeP04 with 12V Lithium – All technologies

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

CHARGE PROCESS
The unit will manage the charge by sequencing around each battery, completing the bulk charge process, then it will move onto the next battery.

If a new battery is connected it will be added into the sequence.

Once all batteries have been charged to the bulk stage the unit will complete the top off charge on each battery and then go into maintenance mode.

After the bulk charge stage, the batteries will be charged to around 70% of capacity. They can be removed at this stage (for faster turnaround of large batches of batteries) or left on for longer to achieve a full charge.

SPECIFICATION
WEIGHT: 6.6lb

SIZE: 11”x10.3×2.4” (with feet) 11”x10.3”x5” (MPL50-Li) or 11” x 10.3” x 13” (MPL50)

LiFePO4 Compatible

COMES WITH:
1 x CDU1 Unit
1 x MPL50 Charger or 1x MPL50-Li Charger
4 x 5’ Battery Leads
1 x 12” Link Adaptor