Description
Description
Batteries LiFePO₄ long term
LOW TEMPERATURE HEATING
When temperatures drop below 0°C and your battery is connected to external power, heating capabilities kick in to keep your battery between 0°C and 45°C, to enable charging and discharge at temperatures as cold as -20°C (-4°F.)
No more guesswork! Connect to your battery from your phone or tablet for real-time monitoring of your battery’s status, including voltage, state of charge, consumption, health and cycle count.
DETACHABLE DESIGN
The detachable design ensures good maintainability of the battery and avoids damage to the case during possible repairs.. (Repair requires trained engineers and professional equipment, and non-professional operation may result in a lower IP protection rating, ultimately affecting your product warranty)
GTB INTELLIGENT
Worry less about your battery with our smart battery management system, which offers protection against short circuits, as well as over/under voltage and over/under temperature fluctuations.
IP65
Ensure peace of mind during your next fishing or water sports adventure, Our batteries are fully IP65 protected against dust and offer significant protection against water splashes and sprays, making them suitable for nearly any application
Tableau comparatif
EWLI-12V1280
EWLI-12V2560
EWLI-12V5120
150 A (Pulse : 30 s)
250 A (Pulse : 30 s)
350 A (Pulse : 30 s)
12,99*6,77*8,66 (in)
18,11*8,66*8,35 (in)
18,11*12,60*9,72 (in)
24,64 (lb)
55 (lb)
90,2 (lb)
Integrated BMS for protections, cell balancing and cycle count.
Protections against:
Overvoltage, overdischarge, overcurrent, short-circuit, high temperature and low temperature while charging and discharging.
Self-heating at temperatures between 0°C and -20°C, from the charging source.
Bluetooth communication via iOS and Android apps.
Mounting brackets.
IP65 rating, protects against dust and water splashes..
Direct replacement of lead acid batteries
Can be used all year round thanks to the integrated self-heating circuit _x000D_ (down to -20°C)
Monitoring via mobile app
Removable cover (can be repaired by a qualified, trained and approved technician)
Up to 6,000 cycles at 0.5C at 80% DOD
Designed to last up to 15 years
Heating from -20°C to 11°C (minimal temperature to start charging) takes around 2 hours
Comply with battery voltage, current and temperature limits as specified in the specification sheet.
Do not discharge the battery completely.
Do not leave the battery discharged.
Do not reverse polarity.
Store at 50% capacity, above 0°C, disconnected from charger and loads, and charge every 3-6 months.
When used in an RV, protect the alternator from overheating by installing a DC/DC charger to limit the current drawn by the lithium battery(ies).
Do not submerge in water.
Do not connect with other battery types and/or brands.
Do not throw, drop or apply excessive force to the battery case.
Do not use for starter applications.
Do not open, drill or modify the casing.
If the BMS disconnects due to low voltage (battery at 0V), apply a voltage higher than the low voltage disconnect voltage from a current limited source (power supply) to wake up the BMS. Recharge as soon as possible.
A charge source of at least 5A must be connected to use the self-heating function.
Faq
EWLI batteries do not support serial connections but can be connected in parallel to increase capacity.
We don’t recommend exceeding 4.
Base de manuel et FAQ EWLI (VoltGo)_rev (1) Base de manuel et FAQ EWLI (VoltGo)_rev (1) 100% 11 B55 The charging time depends on the charging source. You can calculate the charging time using the following equation: Charging Time (h) = Battery Capacity (Ah) ÷ Charging Current (A) For example, if you are using a 20A battery charger to charge your 100Ah battery, it would charge your battery with 20Ah every hour, and thus take 5 (100Ah ÷ 20A) hours to fully charge. The charging time depends on the charging source. You can calculate the charging time using the following equation: Charging Time (h) = Battery Capacity (Ah) ÷ Charging Current (A) For example, if you are using a 20A battery charger to charge your 100Ah battery, it would charge your battery with 20Ah every hour, and thus take 5 (100Ah ÷ 20A) hours to fully charge. Turn on screen reader support To enable screen reader support, press ⌘+Option+Z To learn about keyboard shortcuts, press ⌘slash
No. LiFePO₄ and LFP both stand for lithium iron phosphate, sometimes also written as lithium ferro-phosphate. This is the material that makes up the cathode in all Enerwatt EWLI batteries that we offer.
If your charger’s specifications are in line with your Enerwatt EWLI battery’s charging voltage/current specifications, it can safely be used. Please refer to your battery’s operating specifications, available on the product page for your Enerwatt EWLI battery.
No. Enerwatt EWLI batteries are intended as drop-in replacements in existing electric systems, so they do not ship with a charger.
No. Batteries must have the same capacity (Ah) and voltage (V) to connect to each other. We also do not recommend connecting Enerwatt EWLI batteries to other types or brands of batteries.
For best results, we recommend storing Enerwatt EWLI batteries at a 50% state of charge and recharging them every 3 months to ensure they don’t discharge completely. They should also be stored in a fireproof container at a temperature between 10°C and 35°C (50-95°F).
Enerwatt EWLI batteries use only the highest quality and most stable components, starting with the LiFePO₄ cathode that is the foundation for all our products. The smart Battery Management System (BMS) protects battery cells from the most common causes of battery failure, including short circuit, excessively high or low voltage, and current and/or temperature fluctuations. Each battery undergoes rigorous testing to ensure it performs as intended. We are continuously researching new technology to make our batteries more efficient, reliable and safer.
The advanced materials and manufacturing processes that go into creating our LiFePO₄ batteries necessitate a higher upfront cost than traditional lead acid batteries. However, when you factor in our batteries’ superior performance and extended lifespan, LiFePO₄ batteries may end up saving you a lot of time and money. Enerwatt EWLI customers can expect to use their batteries for 6,000 cycles and up to 15 years.
WARRANTY
8 YEAR LIMITED WARRANTY
Enerwatt Energy guarantees that each Aventura Series LiFePo4 battery sold by Enerwatt Energy or one of its authorized distributors or resellers is free of any malfunction for a period of 8 years from the date of sale determined by the customer’s sale receipt, the shipping invoice and / or the battery serial number, along with a proof of purchase.
Subject to the exclusions listed below, the manufacturer will repair if repairable, replace or credit, the product and / or parts of the product, if the components in question are found to be defective.
During the first 4 years of life of your Enerwatt battery, if applicable under this limited warranty, the amount covered for a new replacement battery will be 100%. From the first day of the 5th year of life of your Enerwatt battery, if applicable under this limited warranty, the amount covered for a new replacement battery will be determined according to the table below:
WARRANTY STATEMENT
This guarantee is the only legitimate guarantee supported by Enerwatt Energy. Under no circumstances can the manufacturer be held responsible for any loss or damage of any other nature, whether direct or indirect, in connection with Enerwatt brand batteries.
This warranty is understood to be the exclusive agreement between the parties concerning the subject matter hereof. No employee or representative of the manufacturer is authorized to offer any warranty in addition to those provided in this agreement.
NON-TRANSFERABLE WARRANTY
The manufacturer has no obligation under this limited warranty for products subject to the following conditions (including, but not limited to):
WARRANTY EXCLUSIONS
The manufacturer has no obligation under this limited warranty for products subject to the following conditions (including, but not limited to):
- Damage due to improper installation; loose terminal connections, undersized wiring, incorrect connections (series and parallel) for desired voltage and AH requirements, or reverse polarity connections;
- Environmental damage; unsuitable storage conditions as defined by the manufacturer; exposure to extremely hot or cold temperatures, to fire or frost, or water damage;
- Damage caused by a collision
- Damage due to improper maintenance; under or overload of the product, cold overload, use of an unsuitable charger;
- Product that has been opened, drilled, modified or altered;
- Product used for applications other than those for which it was designed and intended, including repeated engine starting;
- Product used on an oversized inverter / charger without the use of a manufacturer approved surge protector;
- Product not stored in accordance with manufacturer’s storage guidelines, including storage of product at low state of charge;
- Product that was undersized for use, including an air conditioner or similar device having a locked rotor starting current that is not used in conjunction with a manufacturer approved surge suppressor device;
- This limited warranty does not cover a product which has reached its normal end of life due to excessive use. A battery can only deliver a fixed amount of power over its lifetime, which will occur over different time periods depending on usage. For example, using more than one battery cycle per day repeatedly and frequently will result in normal end of life before the end of the warranty period. The manufacturer reserves the right to refuse a warranty claim if it is determined, upon inspection, that the product has reached its normal end of life even if it remains within its warranty period;
- This limited warranty does not apply to components not essential to the operation of the battery. These are covered as follows: LCD display – 1 year; Bluetooth device – 4 years.
REPAIRS WITHOUT WARRANTY
For any damage outside the warranty period or for damage not covered by the warranty, customers can always contact the manufacturer for battery repairs. The costs will be evaluated and determined according to the terms and conditions.
There are no reviews yet.