Fluke T+CAN Electrical Tester

Fluke T+CAN OffersThe Fluke T+ Electrical Tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. It is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. It has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks.

The Fluke T+ Electrical Tester has three ways to detect ac/dc voltage: light, sound, and vibration. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, it is an excellent choice for most light residential, and HVAC applications.

The Fluke T+ Electrical Tester helps electricians comply with NPFA 70E Article 110.9 (A), which states that “Test equipment shall be rated for circuits and equipment to which they will be connected. The T+ Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work.

Applications:

Best suited for Commercial and residential electricians, HVAC technicians, and Apprentices.
Front-line residential electrical troubleshooting
AC/DC voltage measurement
Continuity testing
Testing GFCI circuits
Resistance measurementFluke T+CAN OffersThe Fluke T+ Electrical Tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. It is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. It has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks.

The Fluke T+ Electrical Tester has three ways to detect ac/dc voltage: light, sound, and vibration. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, it is an excellent choice for most light residential, and HVAC applications.

The Fluke T+ Electrical Tester helps electricians comply with NPFA 70E Article 110.9 (A), which states that “Test equipment shall be rated for circuits and equipment to which they will be connected. The T+ Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work.

Applications:

Best suited for Commercial and residential electricians, HVAC technicians, and Apprentices.
Front-line residential electrical troubleshooting
AC/DC voltage measurement
Continuity testing
Testing GFCI circuits
Resistance measurement

Fluke T+CAN SpecificationsSpecifications
Temperature
Operating
-10 °C to 55 °C (14 °F to 131 °F)
Storage
-30 °C to 60 °C (-22 °F to 140 °F)
Relative humidity

0 °C to 30 °C (32 °F to 86 °F): 90 %

30 °C to 40 °C (86 °F to 104 °F): 75 %

40 °C to 50 °C (104 °F to 122 °F): 45 %
Altitude
Operating
2,000 m (approx. 6,561.6 ft)
Storage
10,000 m (approx. 32,808.4 ft)
Battery type/life

AAA (2); 40 hours
Shock, vibration

Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety

ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1
Second Edition, IEC 61010 – 1 to 1000 V CAT III/600 V CAT IV

Compliance to NFPA 70E*
AC Bandwidth

45 Hz to 66 Hz
Maximum working voltage

1000 V ac/dc
Maximum measurable voltage

600 V ac/dc
Duty cycle

Indefinitely for voltages up to 240 V

For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off

For voltages above 240 V the tester must connect to a voltage source only for a
MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
Voltage hazard LED

LEDs turn on at voltages > 30 V ac/dc ± 35 %
LED voltage indication levels

12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
LEDs

LEDs turn on between 90 % and 100 % of the indicated voltage on the LED, except
for the 12 V LED which turns on between 50 % and 100 %
LCD Resolution

0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V 0.01 kΩ for resistance measurement (For T+PRO Only) GFCI Test current 100 V - 150 V @ 6 mA - 9 mA ac, 150 V - 240 V < 12 mA Standard input test current < 5 mA Size (HxWxL) 1.3 in x 2.15 in x 7.6 in (3.3 cm x 5.46 cm x 19.3 cm ) Weight 9.9 oz (0.28 kg)Click here for complete specifications on the Fluke T+CAN What's included with the Fluke T+CAN User manualTest lead wrapFluke TP2 test probes2 AAA Batteries Webinar: Electrical Equipment Safety with Fluke When safety is on top of mind, everyone benefits. Ensuring that your facility employs the best workplace practices, test tool standards, and ratings, and considers the dangers and causes of incidents will make for a safer work environment. Taking steps to improve these aspects will allow you to enjoy benefits, such as increased productivity and reduced assets-related and accident-related costs. Many tools can help you improve safety by testing, maintaining, monitoring, or troubleshooting live electrical equipment.