Fluke T5-600 Voltage, Continuity and Current Tester with OpenJaw

Fluke T5-600 Offers
Electrical tester with OpenJawTM Current
The Fluke T5-600 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-600, all you have to do is select volts, ohms, or current and the tester does the rest.

The OpenJaw current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.

Also available in 1000V – see the Fluke T5-1000 Voltage, Continuity and Current TesterFluke T5-600 Offers
Electrical tester with OpenJawTM Current
The Fluke T5-600 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-600, all you have to do is select volts, ohms, or current and the tester does the rest.

The OpenJaw current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.

Also available in 1000V – see the Fluke T5-1000 Voltage, Continuity and Current Tester

Fluke T5-600 Specifications

General Specifications

Jaw Opening
0.5″ (12.9 mm)

Max Wire Size
1/0 THHN Cable

Current Range AC RMS
0 to 100.0 A

Accuracy AC Current (50/60 Hz)
3% ± 3 counts

AC Response
Averaging

Voltage Range AC
0 to 600 V

Accuracy AC Voltage
1.5% ± 2 counts

Voltage Range DC
0 to 600 V

Accuracy DC Voltage
1% ± 1 count

Resistance Range
0 to 1000 Ω

Continuity Beeper Threshold
On at <25 Ω, off at >400 Ω

Volts Indicator LED Threshold
Guaranteed on by 30 V AC

Environmental Specifications

Operating Temperature
50 to 122°F (10 to 50°C)

Storage Temperature
-22 to 140°F (-30 to 60°C)

Humidity (Without Condensation)
0 to 95% at 41 to 86°F (5 to 30°C)

0 to 75% at 86 to 104°F (30 to 40°C)

0 to 45% at 104 to 122°F (40 to 50°C)

Dust/Water Resistance
Yes

Operating Altitude
6561.7′ (2000 m)

Temperature Coefficient
0.1 x (specified accuracy)/°C (<18°C or >28°C)

Safety Specifications

Overvoltage Category
CAT III 600 V ac/dc (EN61010-1)

Agency Approvals
CSA, TUV and CE

Maximum Voltage
Between any terminal and earth ground

Mechanical Specifications

Calibration Cycle
One-year

Current Sensor Opening
0.5″ (12.9 mm)

Low Battery Indicator
Yes

Battery Type
2 x AA batteries

Battery Life
200 hour zinc chloride, 400 hour alkaline

Dimensions
1.2 x 2 x 8″ (30.5 x 51 x 203 mm)

Weight
0.66 lb (300 g)

Click here for complete specifications on the Fluke T5-600

What’s included with the Fluke T5-600
Voltage, Continuity and Current Tester
4 mm Detachable Probes
Instruction Sheet

Webinar: Electrical Equipment Safety with Fluke

When safety is on top of mind, everyone benefits. Ensuring that your facility employs the best workplace practices, test tool standards, and ratings, and considers the dangers and causes of incidents will make for a safer work environment. Taking steps to improve these aspects will allow you to enjoy benefits, such as increased productivity and reduced assets-related and accident-related costs. Many tools can help you improve safety by testing, maintaining, monitoring, or troubleshooting live electrical equipment.

How To Check Voltage, Continuity and Currents with the Fluke T5

This video is a tutorial on how to use your electrical tester to measure voltage, continuity, and currents. It enhances productivity with its easy to use compact design and an ideal tool to carry to every job site.