Fluke RSE600 Offers
Continuously identify thermal hotspots, heat build-up, and heat dissipation on products during the development cycle with improved temperature accuracy and thermal sensitivity.
Features
MATLAB® and LabVIEW® software compatibility allows users to integrate infrared data, images and videos to support R&D analysis
640×480 resolution
See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
Optimize images, generate customizable reports and export images to the format of your choice with SmartView® desktop software
Eliminate potential for mis-diagnosis with automatically focused images throughout your field of view with MultiSharpâ„¢ Focus
Applications
Research and development – electrical, mechanical, and biology/sciences
Quality control – pre- and post-production testing
Hardware / design engineering
Lab technician
Printed circuit boards
The importance of image quality in thermography
When conducting infrared inspections, high-quality images that allow for better analysis, presentation, and professionalism are essential.
With a sharply focused image, there is a distinct contrast between areas of varying thermal energy on the surface being inspected. This allows the individual detector elements also known as pixels) to clearly report the intensity of the energy being focused on them.
When the focus is poor, the incoming energy isn’t as concentrated on individual detectors, and their response is skewed. This can lead to temperature measurements that are significantly off, resulting in expensive downtime and possible safety hazards.
Thermal imagers are made with 100% diamond-turned germanium lenses covered with a specialty coating, providing premium quality images.
LaserSharp Auto Focus allows you to select and focus on a specific target
Easily choose and focus on your target
LaserSharpâ„¢ Auto Focus uses a built-in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high-quality image. With LaserSharp Auto Focus, you can:
Easily capture high-quality, focused images of your desired target with the push of a button
Take infrared images through common obstacles like chain link fences
Avoid skewed temperature measurements by precisely choosing your target
Perform the same inspections multiple times as a part of your preventive maintenance program – the built-in laser distance meter calculates and displays how far you are from your target, making repeatability much easier
Choose multiple targets at different distances
MultiSharpâ„¢ Focus takes multiple images from different focal distances and combines them into one clear image. With a simple point and shoot, you can go from being completely out of focus, to complete focus, throughout the field of view. With MultiSharp:
Reduce the need to take individual images of targets that are in the camera’s field of view – focus on one target, and all objects that are in the camera’s field of view will be in focus
Cut downtime spent taking multiple images to increase productivity
Capture quality, in-focus images, even under direct sunlight
1.Middleground in focus
2.Foreground in focus
3.Background in focus
Shoot from a distance
Infrared inspections can take you into multiple types of environments with many types of equipment. Interchangeable lenses that require no calibration give you the versatility and the image quality needed to conduct inspections in almost any environment.
Reduce the need to enter the danger zone with a 2x telephoto lens
Identify potential issues as small and distant as a failed splice on a high electrical line from the ground with a 4x telephoto lens
Save time with roofing and industrial building inspections by viewing a large area at one time with a wide-angle lens
High voltage power pole, captured with a TiX560 camera and standard lens
The same power pole captured from the same distance, but with a 2x telephoto lens
The same power pole captured from the same distance, but with a 4x telephoto lens
Easily manage and analyze your data
Whether you are troubleshooting or conducting maintenance inspections, having easy access to more information faster is always a big benefit.
Document information on the equipment you’re inspecting
With IR PhotoNotesâ„¢, voice or text annotation, you can easily document critical information about each piece of equipment and its location. Each “note” attaches to the image, so you never have to search or match up notes to images.
Document critical information with your infrared image
Capture surrounding details like wind conditions and time of day
Identify asset location
Image Info
IR Sensor Size
320 x 240
Distance to Target
0.69 m
Main Image Markers
Name
Temperature
Centerpoint
29.1°C
Capture digital and infrared images at once
IR Fusionâ„¢ technology combines visible light and an infrared image into one, giving you better clarity.
Get exact location details in picture-in-picture mode, which provides the center part of the display in IR and the remainder of the image in visible light
See more details when you adjust the level of infrared and visible light blending in AutoBlendâ„¢ mode
Isolate problem areas with user-defined temperature ranges with IR color alarms
IR Fusion picture-in-picture mode: Ironbow palette
IR Fusion picture-in-picture mode: AutoBlend
IR Fusion color alarm
ROI and thermal imaging
Seven benefits of on-site infrared inspections
Reduce downtime
Inspections can be done while equipment is running – no lost production time.
Protect lives while doing more
The non-contact nature of infrared inspections allows technicians to scan large areas quickly, from a safer distance away. That means technicians can inspect more equipment faster.
Improve production efficiency
Subtle problems are found and addressed before they have a major impact on production.
Document before and after
Validate post-maintenance work and capture the results for future review.
Reduce capital expenses
Finding and repairing problems at an early stage can improve the life expectancy of equipment, as a result extending replacement intervals.
Increase productivity
Quickly scan a large area to find air leaks, insulation gaps, moisture and overheated electrical components to complete more work in less time.
Identify work in easy-to-understand terms
See exactly what the problem is on the camera, eliminating guesswork and making it easier for everyone to see what repairs needs to be done.
Review thermal images side by side, making it easy to compare today’s reading with the baseline or other historical images. Fluke RSE600 Offers
Continuously identify thermal hotspots, heat build-up, and heat dissipation on products during the development cycle with improved temperature accuracy and thermal sensitivity.
Features
MATLAB® and LabVIEW® software compatibility allows users to integrate infrared data, images and videos to support R&D analysis
640×480 resolution
See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
Optimize images, generate customizable reports and export images to the format of your choice with SmartView® desktop software
Eliminate potential for mis-diagnosis with automatically focused images throughout your field of view with MultiSharpâ„¢ Focus
Applications
Research and development – electrical, mechanical, and biology/sciences
Quality control – pre- and post-production testing
Hardware / design engineering
Lab technician
Printed circuit boards
The importance of image quality in thermography
When conducting infrared inspections, high-quality images that allow for better analysis, presentation, and professionalism are essential.
With a sharply focused image, there is a distinct contrast between areas of varying thermal energy on the surface being inspected. This allows the individual detector elements also known as pixels) to clearly report the intensity of the energy being focused on them.
When the focus is poor, the incoming energy isn’t as concentrated on individual detectors, and their response is skewed. This can lead to temperature measurements that are significantly off, resulting in expensive downtime and possible safety hazards.
Thermal imagers are made with 100% diamond-turned germanium lenses covered with a specialty coating, providing premium quality images.
LaserSharp Auto Focus allows you to select and focus on a specific target
Easily choose and focus on your target
LaserSharpâ„¢ Auto Focus uses a built-in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high-quality image. With LaserSharp Auto Focus, you can:
Easily capture high-quality, focused images of your desired target with the push of a button
Take infrared images through common obstacles like chain link fences
Avoid skewed temperature measurements by precisely choosing your target
Perform the same inspections multiple times as a part of your preventive maintenance program – the built-in laser distance meter calculates and displays how far you are from your target, making repeatability much easier
Choose multiple targets at different distances
MultiSharpâ„¢ Focus takes multiple images from different focal distances and combines them into one clear image. With a simple point and shoot, you can go from being completely out of focus, to complete focus, throughout the field of view. With MultiSharp:
Reduce the need to take individual images of targets that are in the camera’s field of view – focus on one target, and all objects that are in the camera’s field of view will be in focus
Cut downtime spent taking multiple images to increase productivity
Capture quality, in-focus images, even under direct sunlight
1.Middleground in focus
2.Foreground in focus
3.Background in focus
Shoot from a distance
Infrared inspections can take you into multiple types of environments with many types of equipment. Interchangeable lenses that require no calibration give you the versatility and the image quality needed to conduct inspections in almost any environment.
Reduce the need to enter the danger zone with a 2x telephoto lens
Identify potential issues as small and distant as a failed splice on a high electrical line from the ground with a 4x telephoto lens
Save time with roofing and industrial building inspections by viewing a large area at one time with a wide-angle lens
High voltage power pole, captured with a TiX560 camera and standard lens
The same power pole captured from the same distance, but with a 2x telephoto lens
The same power pole captured from the same distance, but with a 4x telephoto lens
Easily manage and analyze your data
Whether you are troubleshooting or conducting maintenance inspections, having easy access to more information faster is always a big benefit.
Document information on the equipment you’re inspecting
With IR PhotoNotesâ„¢, voice or text annotation, you can easily document critical information about each piece of equipment and its location. Each “note” attaches to the image, so you never have to search or match up notes to images.
Document critical information with your infrared image
Capture surrounding details like wind conditions and time of day
Identify asset location
Image Info
IR Sensor Size
320 x 240
Distance to Target
0.69 m
Main Image Markers
Name
Temperature
Centerpoint
29.1°C
Capture digital and infrared images at once
IR Fusionâ„¢ technology combines visible light and an infrared image into one, giving you better clarity.
Get exact location details in picture-in-picture mode, which provides the center part of the display in IR and the remainder of the image in visible light
See more details when you adjust the level of infrared and visible light blending in AutoBlendâ„¢ mode
Isolate problem areas with user-defined temperature ranges with IR color alarms
IR Fusion picture-in-picture mode: Ironbow palette
IR Fusion picture-in-picture mode: AutoBlend
IR Fusion color alarm
ROI and thermal imaging
Seven benefits of on-site infrared inspections
Reduce downtime
Inspections can be done while equipment is running – no lost production time.
Protect lives while doing more
The non-contact nature of infrared inspections allows technicians to scan large areas quickly, from a safer distance away. That means technicians can inspect more equipment faster.
Improve production efficiency
Subtle problems are found and addressed before they have a major impact on production.
Document before and after
Validate post-maintenance work and capture the results for future review.
Reduce capital expenses
Finding and repairing problems at an early stage can improve the life expectancy of equipment, as a result extending replacement intervals.
Increase productivity
Quickly scan a large area to find air leaks, insulation gaps, moisture and overheated electrical components to complete more work in less time.
Identify work in easy-to-understand terms
See exactly what the problem is on the camera, eliminating guesswork and making it easier for everyone to see what repairs needs to be done.
Review thermal images side by side, making it easy to compare today’s reading with the baseline or other historical images.
Fluke RSE600/C 60HZ Specifications
Detector Resolution
320 x 240 76,800 Pixels)
IFOV with Standard Lens Spatial Resolution)
1.85 mRad
Field of View
34 x 24°
Minimum Focus Distance
6″ 15 cm)
Thermal Sensitivity NETD)
≤0.030°C at 30°C target temperature 30 mK)
Frame Rate
60 Hz
Digital Zoom
Variable up to 16x in SmartView R7D desktop software
Data Storage and Image Capture
Memory Options
Stream and capture data directly to the PC
Image Capture, Review, Save Mechanism
Capture, save and analyze images in SmartView R&Dâ„¢ desktop software
Software
SmartView R&D™ desktop software—full analysis and reporting software
Compatible with MATLAB® and LabVIEW® software
Temperature Measurement Range Not Calibrated Below -10°C)
14 to 2192°F -10 to 1200°C)
Accuracy
±2°C or ±2%, whichever is greater
Temperature
Operating: 14 to 122°F -10 to 50°C)
Storage: -4 to 122°F -20 to to 50°C)
Dimensions
3.3 x 3.3 x 6.5″ 8.3 x 8.3 x 16.5 cm)
Weight
2.2 lbs 1 kg)
Click here for complete specifications on the Fluke RSE600/C 60HZ
What’s included with the Fluke RSE600/C 60HZ
Infrared Camera
AC Power Supply
Ethernet Cable
Antenna
SmartView R&D Software Key
Lens Cover
Hard Carrying Case
Model
Fluke RSE600
Fluke RSE300
Infrared resolution
640 x 480 307,200 pixels)
320 x 240 76,800 pixels)
IFOV
spatial resolution)
0.93 mRad
1.85 mRad
Field of view
34°H x 24°V
34°H x 24°V
Thermal sensitivity*
≤ 0.040 at 30°C target temp 40 mK)*
≤ 0.030 at 30°C target temp 30 mK)*
Temperature range
14 to +2192°F -10 to +1200°C)
14 to +2192°F -10 to +1200°C)
Focus systems
Focus is adjusted in Fluke Connect Desktop software
manual or MultiSharpâ„¢)
Laser distance meter
Optional lenses
Pre-calibrated smart lenses: wide angle, 2x telephoto,
4x telephoto, macro
Wireless connectivity**
IR-Fusion®
Yes, in Fluke Connect Desktop software. Five modes of image blending
AutoBlendâ„¢ mode,
Picture-in-Picture PIP), IR/Visible alarm, Full IR, Full visible light)
add the context
of the visible details to your infrared image
Display
Design
Can be mounted to a stand or wall bracket for continuous data streaming
Frame rate
60 or 9 Hz versions
60 or 9 Hz versions
Software
Fluke Connect Desktop software—full analysis and reporting
software
Compatible with MATLAB® and LabVIEW® software
Voice annotation
Yes, in Fluke Connect Desktop software
Text annotation
Yes, in Fluke Connect Desktop software
Video recording
Radiometric, in Fluke Connect Desktop software, with exports to standard non-radiometric formats
Streaming video
remote display)
Yes, see the live stream of the camera on your PC, smartphone, or TV monitor.
Via USB, WiFi hotspot,
or WiFi network to Fluke Connect Desktop software on a PC;
via WiFi hotspot to the Fluke Connectâ„¢ app
Remote control operation
Yes, through ethernet or Fluke Connect Desktop software
Alarms
Yes, in Fluke Connect Desktop software–high temperature
low temperature,
and isotherms within range)
Warranty
Two-years standard), extended warranties are available
*Best possible
**Fluke Connectâ„¢ not available in all countries
There are no reviews yet.