Fluke 88V/A Kit Automotive Multimeter Combo Kit

Fluke 88V/A KIT OffersReduce risks related to surges and spikes with this automotive multimeter that can withstand impulses of 8000 V. In addition, this multimeter complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V and features more problem-solving power, safety, convenience, and impact protection.FeaturesBuilt-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrumentMagnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasksPeak minimum/maximum to capture intermittent events as short as 250 micro secondsLarge digit display with bright, two-level backlight makes this multimeter significantly easier to read than the old version6000 counts, 3-¾ digitsMeasure up to 1000 V AC and DCMeasure up to 10 and 20 A for up to 30 secondsBuilt in thermometer lets you carry one less tool (temperature probe included)Frequency to 200 kHz and % duty cycleResistance, continuityRPM measurements with inductive pickupMillisecond pulse width measurements for fuel injectorsMagnet hanger to attach meter to the vehicle and free your hands for other tasks10,000 μF capacitance range for components and motor capsMinimum/maximum-average recording with minimum/maximum alert to capture variations automaticallyPeak capture to record transients as fast as 250 μsRelative mode to remove test lead interference from low ohms measurementsAuto and manual ranging for maximum flexibilityTouch Hold to capture stable readings avoiding noisy signalsLarge display digits and two-level bright white backlight for increased visibilityAnalog bargraph for fast changing or unstable signalsInput alert provides audible warning against wrong use of input jacksImproved selectable sleep mode for long battery lifeAccess door for fast battery changes without opening up the case”Classic” design with new removable holster with built in test lead and probe storage10 meg ohm input impedance wont load circuits0.1% DC accuracyElectrical safety: All inputs are protected to category III, 1000 V and category IV 600 V and they can withstand impulses in excess of 8000 V and reduce risks related to surgesPosition the meter in the most usable location with the magnetic hanger: The holster on this multimeter accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces and allows you to focus on taking measurements instead of holding the meter in your handApplicationsAutomotiveFluke 88V/A KIT OffersReduce risks related to surges and spikes with this automotive multimeter that can withstand impulses of 8000 V. In addition, this multimeter complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V and features more problem-solving power, safety, convenience, and impact protection.FeaturesBuilt-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrumentMagnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasksPeak minimum/maximum to capture intermittent events as short as 250 micro secondsLarge digit display with bright, two-level backlight makes this multimeter significantly easier to read than the old version6000 counts, 3-¾ digitsMeasure up to 1000 V AC and DCMeasure up to 10 and 20 A for up to 30 secondsBuilt in thermometer lets you carry one less tool (temperature probe included)Frequency to 200 kHz and % duty cycleResistance, continuityRPM measurements with inductive pickupMillisecond pulse width measurements for fuel injectorsMagnet hanger to attach meter to the vehicle and free your hands for other tasks10,000 μF capacitance range for components and motor capsMinimum/maximum-average recording with minimum/maximum alert to capture variations automaticallyPeak capture to record transients as fast as 250 μsRelative mode to remove test lead interference from low ohms measurementsAuto and manual ranging for maximum flexibilityTouch Hold to capture stable readings avoiding noisy signalsLarge display digits and two-level bright white backlight for increased visibilityAnalog bargraph for fast changing or unstable signalsInput alert provides audible warning against wrong use of input jacksImproved selectable sleep mode for long battery lifeAccess door for fast battery changes without opening up the case”Classic” design with new removable holster with built in test lead and probe storage10 meg ohm input impedance wont load circuits0.1% DC accuracyElectrical safety: All inputs are protected to category III, 1000 V and category IV 600 V and they can withstand impulses in excess of 8000 V and reduce risks related to surgesPosition the meter in the most usable location with the magnetic hanger: The holster on this multimeter accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces and allows you to focus on taking measurements instead of holding the meter in your handApplicationsAutomotive

Fluke 88V/A KIT Specifications

DCV
Maximum voltage: 1000 V
Accuracy: ±(0.1% + 1)
Best resolution: 0.01 mV

ACV
Maximum voltage: 1000 V
Accuracy: ±(0.5% + 2)
AC bandwidth: 5 kHz
Best resolution: 0.01 mV

Current
DC:
Maximum amps: 10 A
Amps accuracy: ±(0.4% + 2)
Best resolution: 0.001 mA

AC:
Maximum amps: 10 A
Amps accuracy: ±(1.2% + 2)
Best resolution: 0.001 mA

Resistance
Maximum: 50 MΩ
Accuracy: ±(0.4% + 1)
Best resolution: 0.1Ω

Capacitance
Maximum: 9999 μF
Accuracy: ±(1% + 2)
Best resolution: 0.01 nF

Frequency
Maximum: 200 KHz
Accuracy: ±(0.005% + 1)
Best resolution: 0.01 Hz

Duty Cycle
Maximum: 99.9%
Accuracy: Within 2% per KHz +0.1%
Best resolution: 0.1%

Temperature Measurements
-328 to 194°F (-200 to 1090°C), 1% excluding probe

80 BK Temperature Probe
-40 to 500°F (-40 to 260°C), 35.96°F (2.2°C) or 2% whichever is greater

Conductance
Maximum: 60 nS
Accuracy: ±(1% + 10)
Maximum resolution: 0.01 nS

Temperature Range
Operating: -4 to 131°F (-20 to 55°C)
Storage: -40 to 140 °F (-40 to 60°C)

Dimensions
2.06 x 3.86 x 7.93″ (5.2 x 9.8 x 20.1 cm)

Weight
22 oz (624 g)

Click here for complete specifications on the Fluke 88V/A KIT

What’s included with the Fluke 88V/A KITAutomotive MultimeterSilicone Test LeadsLong Reach Alligator ClipsTest ProbesRPM 80 Inductive RPMTPAK ToolPak™ Magnetic Meter Hanging KitTemperature Probe2 x Automotive Backprobe PinsInsulation Piercing ProbeHolsterSoft Carrying Case9 V Battery (Installed)CD with Detailed ManualGetting Started ManualLifetime Warranty

Fluke: How-To Check Power Quality With A Multimeter

This video will serve as a how-to on checking the power quality with a multimeter; specifically the 87V. One of the ways to check the power quality, is by using the peak Min/Max.

Fluke: How-To Configure A Multimeter To Use AC And AC/DC Current Clamps

This video will serve as a how-to on extending the life of your Fluke multimeter by using AC and AC/DC current capabilities. The step-by-step process shown here will have you configuring your instrument in no time at all!

Fluke: How-To Test Fuses in A Multimeter

This video will serve as a how-to on testing fuses in multimeters; specifically the 87V & 233. Without having to open the case, you can change your setting to the Ohm function and jump from the Ohm jack to the Amp jack to measure across the fuse and see its continuity.

Fluke: What Is Peak MIN/MAX and How Do I Use It

If you have a multimeter, you need to know what peak Min/Max is. This video explains this feature using the 87V multimeter.