Fluke 87V/IMSK OffersEfficient and safe, this industrial multimeter is designed to withstand spikes higher than 8000 V and features an audible warning if test leads are placed in the wrong input jacks. In addition, this multimeter includes an analog bar graph and a removable holster with storage for the test lead and probe.True-rms accuracy and advanced functionality to give you the results you needTrue-rms accuracy with manual and automatic ranging, display hold, auto hold, and minimum/maximum-average recordingEfficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locationsA low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 μSThe current clamp turns the multimeter into a clamp meterThe current clamp provides accurate current measurements up to 400 A AC without breaking electric circuitsAllows taking measurements safely with industry standard safety ratingsSelect accessories like temperature probe, test leads and alligator clipsTemperature probe plugs into the multimeters voltage jacks and allows temperature measurements from -40 to 500°F (-40 to 260°C)Test leads and alligator clips complete this versatile kitKey safety featuresSafety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the jobDesigned to withstand spikes of more than 8000 V; audible input alert warning against wrong use of input jacksApplicationsMotor drivesPlant automationPower distributionElectromechanical equipmentFluke 87V/IMSK OffersEfficient and safe, this industrial multimeter is designed to withstand spikes higher than 8000 V and features an audible warning if test leads are placed in the wrong input jacks. In addition, this multimeter includes an analog bar graph and a removable holster with storage for the test lead and probe.True-rms accuracy and advanced functionality to give you the results you needTrue-rms accuracy with manual and automatic ranging, display hold, auto hold, and minimum/maximum-average recordingEfficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locationsA low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 μSThe current clamp turns the multimeter into a clamp meterThe current clamp provides accurate current measurements up to 400 A AC without breaking electric circuitsAllows taking measurements safely with industry standard safety ratingsSelect accessories like temperature probe, test leads and alligator clipsTemperature probe plugs into the multimeters voltage jacks and allows temperature measurements from -40 to 500°F (-40 to 260°C)Test leads and alligator clips complete this versatile kitKey safety featuresSafety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the jobDesigned to withstand spikes of more than 8000 V; audible input alert warning against wrong use of input jacksApplicationsMotor drivesPlant automationPower distributionElectromechanical equipment
Fluke 87V/IMSK Specifications
Voltage
DC:
Maximum voltage: 1000 V
Accuracy: ±(0.05% + 1)
Maximum resolution: 10μV
AC:
Maximum voltage: 1000 V
Accuracy: ±(0.7% + 2) True RMS
AC bandwidth: 20 kHz with low pass filter; 3 dB at 1 kHz
Maximum resolution: 0.1 mV
Current
DC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(0.2% + 2)
Maximum resolution: 0.01μA
AC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(1.0% + 2) True RMS
Maximum resolution: 0.1μA
Resistance
Maximum resistance: 50 MΩ
Accuracy: ±(0.2% + 1)
Maximum resolution: 0.1 Ω
Capacitance
Maximum capacitance: 9,999 μF
Accuracy: ±(1% + 2)
Maximum resolution: 0.01 nF
Frequency
Maximum frequency: 200 kHz
Accuracy: ±(0.005% + 1)
Maximum resolution: 0.01 Hz
Duty Cycle
Maximum duty cycle: 99.9%
Accuracy: ±(0.2% per kHz + 0.1%)
Maximum resolution: 0.1%
Range: Accuracy within ±(0.2% per kHz + 0.1%)
Temperature
Measurement: -328 to 1994°F (-200 to 1090°C) excluding probe
Operating: 68 to 131°F (-20 to 55°C)
Storage: -40 to 140°F (-40 to 60°C)
80 BK Temperature Probe
-40 to 500°F (-40 to 260°C), 35.96°F (2.2 °C) or 2% whichever is greater
Conductance
Maximum conductance: 60.00 nS
Accuracy: ±(1% + 10)
Maximum resolution: 0.01 nS
Diode
Range: 3 V
Resolution: 1 mV
Accuracy: ±(2% + 1)
AC Current Clamp
Nominal current range: 400 A
Continuous current range: 1 to 400 A
Maximum non-destructive current: 1000 A
Lowest measurable current: 1 A
Basic accuracy: 2% + 0.06 A, 45 to 400 Hz, % reading + floor spec
Useable frequency: 5 to 20 kHz
Output level(s): 1 mA/A
Safety: CAT IV 600 V, CAT III, 1000 V
Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010
Maximum conductor diameter: 1.25″ (32 mm)
Maximum conductor size (busbar): 750 MCM
Output cable length: 59″ (1.5 m)
Shrouded banana plugs: Yes
Humidity (without condensation)
0 to 90% (32 to 95°F [0 to 35°C])
0 to 70% (95 to 131°F [35 to 55°C])
Operating Altitude
6561.68′ (2000 m)
Overvoltage Category
EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals
CE, CSA, RCM
Display
Digital: 6000 counts updates 4/seconds, 19,999 counts in high-resolution mode
Analog: 32 segments, updates 40/seconds
Frequency: 19,999 counts, updates 3/seonds at > 10 Hz
Shock
3.28′ (1m) drop per IEC 61010-1:2001
Vibration
Per MIL-PRF-28800 for a Class 2 instrument
Power
Alkaline approximately 400 hours typical, without backlight
Dimensions
7.9 x 3.8 x 2″ (201 x 98 x 52 mm) (with holster)
Weight
0.78 lbs (355 g)
With holster: 1.37 lbs (624 g)
Click here for complete specifications on the Fluke 87V/IMSK
What’s included with the Fluke 87V/IMSK Fluke-87V Multimeter with temperature frequency, capacitance 250 μs peak minmaxFluke-i400 AC 400A Current Clamp80BK-A thermocouple bead probeTL75 test leadsAC72 Alligator ClipsLimited Lifetime warranty on Fluke-87V and 1-year warranty on accessories
Webinar: EVSE Safety Maintenance with Fluke
In recent years, more people are opting for greener solutions to minimize environmental damage, which has led to an increased demand for environmentally safe solutions such as electric vehicles. Naturally, this has led to an increase in the installation of EV charging stations, but also the risks for technicians. In 2020, there were 126 fatal and 2200 non-fatal electrical injuries. Many of these are caused when technicians are exposed to hazardous voltage and arc faults that could cause shock and fire hazards due to a lack of understanding of proper EVSE installation and maintenance. Considering that EVSEs have a high rate of failure, estimated at 30 to 50% (SAE), reliability is essential when building EV infrastructure and gaining user acceptance.
Fluke: How-To Check Power Quality With A Multimeter
This video will serve as a how-to on checking the power quality with a multimeter; specifically the 87V. One of the ways to check the power quality, is by using the peak Min/Max.
Fluke: How-To Test Fuses in A Multimeter
This video will serve as a how-to on testing fuses in multimeters; specifically the 87V & 233. Without having to open the case, you can change your setting to the Ohm function and jump from the Ohm jack to the Amp jack to measure across the fuse and see its continuity.
Fluke: How-To Measure Frequency and Duty Cycle With The 87V Industrial Multimeter
The 87V has many advanced measurements such as the frequency and duty cycle and this video shows you, the user, how simple it is to measure these with this instrument.
Fluke: What Is Peak MIN/MAX and How Do I Use It
If you have a multimeter, you need to know what peak Min/Max is. This video explains this feature using the 87V multimeter.
Fluke: How-To Configure A Multimeter To Use AC And AC/DC Current Clamps
This video will serve as a how-to on extending the life of your Fluke multimeter by using AC and AC/DC current capabilities. The step-by-step process shown here will have you configuring your instrument in no time at all!
Fluke: How-To Repair Fading Digits in the 87V Industrial TRMS Multimeter
If the digits are fading or not lighting up on your 87V, this video will serve as a how-to on fixing these issues.
There are no reviews yet.