Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings.
Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements.
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.
Applications:
Industrial plants and facilities
Building maintenance, e.g. universities, hospitals, large offices, correctional institutions
Plant works, e.g. power, pharmaceutical, printing, automotive assembly
Manufacturing and process facilities
Refineries
Steel mills and other metal manufacturing plants
Large DC systems such as DC electroplating, or marine electrical systemsIndustrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings.
Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements.
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.
Applications:
Industrial plants and facilities
Building maintenance, e.g. universities, hospitals, large offices, correctional institutions
Plant works, e.g. power, pharmaceutical, printing, automotive assembly
Manufacturing and process facilities
Refineries
Steel mills and other metal manufacturing plants
Large DC systems such as DC electroplating, or marine electrical systems
Fluke 353 Specifications
Current Measurement DC and AC 10 to 100 Hz
Range
40 A/400 A/2000 A/1400 AC RMS
Resolution
10 mA/100 mA/1 A
Accuracy
A: 1.5% rdg + 15 digits
A: 1.5% rdg + 5 digits
Trigger Level for Inrush
0.50 A/5.0 A/5 A
Trigger Level for Hz Filter OFF
2.50 A/2.5 A/8 A
Trigger Level for Hz Filter ON
0.50 A/2.5 A/8 A
Crest Factor (50/60 Hz)
Range
40 A/400 A/2000 A/1400 AC RMS
Crest Factor
2 at 33 A, 2.4 at 27 A
2 at 330 A, 2.4 at 270 A
2 at 1000 A, 2.4 at 833 A
Current Measurement AC 100.1 Hz to 1 kHz
Range
40 A/400 A/2000 A; 1400 AC RMS
Resolution
10 mA/100 mA/1 A
Accuracy
10 A: 3.5% rdg + 15 digits
10 A: 3.5% rdg + 5 digits
Trigger Level for Inrush
0.50 A/5.0 A/5 A
Trigger Level for Hz Filter OFF
2.50 A/2.5 A/8 A
Trigger Level for Hz Filter ON
0.50 A/2.5 A/8 A
Frequency Measurement
Measurement Range
5.0 Hz to 1 kHz
Resolution
0.1 Hz (15 Hz to 399.9 Hz)
1 Hz (400 Hz to 1 kHz)
Accuracy
5.0 to 100 Hz: 0.2% + 2 counts
100.1 Hz to 1 kHz: 0.5% + 5 counts
Environmental Specifications
Operating Temperature
32 to 122°F (0 to 50°C)
Storage Temperature
-4 to 140°F (-20 to 60°C)
Operating Humidity
0 to 95% (non-condensing)
Operating Altitude
6561.68′ (2000 m)
Storage Altitude
32,808.4′ (10,000 m)
IP Rating
42 (indoor use only)
Drop Test Requirements
3.28′ (1 m)
EMI, RFI, EMC
FCC part 15, IEC/EN 61326-1:1997 class B IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
Temperature Coefficients
Current: 0.1% of reading per °C outside 22°C to 24°C
Voltage: 0.1% of reading per °C outside 22°C to 24°C
General Specifications
Battery
Type: 6 x 1.5 V AA NEDA 15 A or IEC LR6
Life: 100 hours
Test Leads
Rated to 1000 V
Jaw Size
2.28″ (58 mm)
Dimensions
12 x 3.75 x 2″ (300 x 98 x 52 mm)
Weight
1.8 lbs (0.814 kg)
Safety Rating
IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III
Click here for complete specifications on the Fluke 353
What’s included with the Fluke 353
Clamp Meter
Carrying Case
6 x AA Batteries
Users Manual
Three-Year Warranty
There are no reviews yet.