Fluke 289 True RMS Industrial Data Logging Multimeter with TrendCapture

Fluke 289 True-rms Industrial Logging Multimeter with TrendCapture
The Fluke 289 is a high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime.

Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit

Equipped with powerful functionality

TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
Selectable ac filter (Smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
Large 50,000 count, 1/4 VGA dot matrix display with white backlight
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before pc download is necessary
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
“i” button. On board help screens for measurement functions. Unsure about a function-go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings
Relative mode to remove test lead resistance from low ohms or capacitance measurements
True-rms ac voltage and current for accurate measurements on non linear signals
Measure up to 10 A (20 A for 30 seconds)
100 mF capacitance range
Peak capture to record transients as fast as 250 µs
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
Optically isolated communication port for transferring data to pc (usb cable and software optional)
Limited lifetime warrantyFluke 289 True-rms Industrial Logging Multimeter with TrendCapture
The Fluke 289 is a high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime.

Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit

Equipped with powerful functionality

TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
Selectable ac filter (Smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
Large 50,000 count, 1/4 VGA dot matrix display with white backlight
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before pc download is necessary
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
“i” button. On board help screens for measurement functions. Unsure about a function-go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings
Relative mode to remove test lead resistance from low ohms or capacitance measurements
True-rms ac voltage and current for accurate measurements on non linear signals
Measure up to 10 A (20 A for 30 seconds)
100 mF capacitance range
Peak capture to record transients as fast as 250 µs
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
Optically isolated communication port for transferring data to pc (usb cable and software optional)
Limited lifetime warranty

Fluke 289 Specifications

DC Volts

Range/Resolution
50.000 to 500.00 mV

5.0000 to 50.000 V

500.00 to 1000.0 V

Basic Accuracy
0.025%

AC Volts

Range/Resolution
50.000 to 500.00 mV

5.0000 to 50.000 V

500.00 to 1000.0 V

Basic Accuracy
0.4% (True RMS)

DC Current

Range/Resolution
500.00 to 5000.0 µA

50.000 to 400.00 mA

5.0000 to 10.000 A

Basic Accuracy
0.05%

AC Current

Range/Resolution
500.00 to 5000.0 µA

50.000 to 400.00 mA

5.0000 to 10.000 A

Basic Accuracy
0.6% (True RMS)

Temperature (Excluding Probe)

Range/Resolution
328 to 2462°F (-200 to 1350°C)

Basic Accuracy
1.0%

Resistance

Range/Resolution
50.000 to 500.00 Ω

5.0000 to 50.000 kΩ

500.00 kΩ to 5.0000 MΩ

50.00 to 500.0 MΩ

Basic Accuracy
0.05%

Capacitance

Range/Resolution
1.000 to 10.00 nF

100.0 nF to 1.000 µF

10.00 to 100.0 µF

1000 µF to 100 mF

Basic Accuracy
1.0%

Frequency

Range/Resolution
99.999 to 999.99 Hz

9.9999 to 999.99 kHz

Basic Accuracy
0.005%

General Specifications

Maximum Voltage Between any Terminal and Earth Ground
1000 V

Battery Type
6 x AA Alkaline batteries, NEDA 15A IECLR6

Battery Life
100 hours minimum, 200 hours in logging mode

Operating Temperature
-4 to 131°F (-20 to 55°C)

Storage Temperature
-40 to 140°F (-40 to 60°C)

Relative Humidity
0 to 90% (32 to 98.6°F [0 to 37°C])

0 to 65% (98.6 to 113°F [37 to 45°C])

0 to 45% (113 to 131°F [45 to 55°C])

Electromagnetic Compatibility
EMC EN61326–1

Vibration
Random vibration per MIL-PRF-28800F Class 2

Shock
3.3 (1 m) drop per IEC/EN 61010–1 3rd Edition

Dimensions
8.75 x 4.03 x 2.38″ (222 x 102 x 60 mm)

Weight
1.92 lbs (870.9 g)

Click here for complete specifications on the Fluke 289

What’s included with the Fluke 289
Multimeter
Test Leads
Alligator Clips
6 x AA Batteries

See it. Save it. Share it. All the facts, right in the field.

Fluke engineers have delivered an innovative mobile platform and tool that helps solve everyday problems, allowing you to instantly document measurements, retrieve historical data, and share live measurements with your team. All handled by the Android™ or iOS smart phone you already carry.

Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is works with over 20 different Fluke products – the largest suite of connected test tools in the world.

Make the best decisions faster than ever before by viewing temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.

Fluke Connect Features:

TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly.

EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup.

ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere.

AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup.

Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime.

Fluke Connect Benefits:

Maximize uptime

Minimize maintenance costs

Better assessments with accurate records

Higher efficiency with less walking around; no notebook and excel needed

Share troubleshooting knowledge live

Create and share helpful content in the field

Access to Fluke digital product manuals means no need to carry manuals in the field

Keep organized manually entered measurements

Fluke 289 True RMS Industrial Data Logging Multimeter: Overview

This video gives an overview of the Fluke 289 & 287’s features like bright backlight for increased visibility, a simple interface and on-board help.

How To Use the Data Logging Feature on the Fluke 289 True RMS Industrial Data Logging Multimeter

This video demonstrates how to use the data logging feature on the Fluke 289. This function allows the user to record the data that they need while they’re busy doing another task. Setting up a data logging session only takes a few steps!

How To Use the Min/Max/Avg Feature on the Fluke 289 True RMS Industrial Data Logging Multimeter

This video demonstrates how to use the Min/Max/Avg feature on the Fluke 289 & 287. This function allows the user to capture these input values in order to evaluate a wide range of signal anomalies.

Fluke 289 True RMS Industrial Data Logging Multimeter with TrendCapture

This video gives an overview of the TrendCapture function on the Fluke 280 Series. The feature allows the user to not have to upload their data computer to view them. Users can graphically view information directly on the meter.

Fluke 289 True RMS Industrial Data Logging Multimeter: Mission 10,000 Readings

This animated, short video is perfect for showcasing how useful the Fluke 289 is capturing readings with its TrendCapture feature.