Fluke 190-102-III CAL OffersAccurate and versatile, this portable oscilloscope provides a fast sampling rate of up to 5 GS/s, a 200 ps resolution, and deep memory of 10,000 samples per channel. Perform timing or amplitude-related measurements on three phases or three-axis control systems, or compare and contrast multiple test points in a circuit under test.
Features
Up to four independent floating isolated inputs, up to 1000 V
Up to 5 GS/s real time sampling (depending on model and channels used)
Deep memory: 10,000 points per trace waveform capture (scope mode)
CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
Up to seven hours of battery operation using BP291
Large, bright color display is easy to view in nearly any environment
Easy to store and view historical data and transfer to a PC via USB or Wifi
Convenient battery access door for quick battery swaps in the field
IP51 rating, dust and drip-proof
Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals
Frequency spectrum using FFT-analysis
Automatic capture and REPLAY of 100 screens
ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis
TrendPlot Paperless Recorder mode with deep memory for longterm automatic measurements
5000 count DMM included in the 2-channel models
Applications
Microelectronics
Troubleshooting
Measure from mV to kV safely
Independently isolated inputs allow you to make measurements in mixed circuits having different ground references reducing the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. ScopeMeter 190 Series III test tools are engineered to cover a wide application range from mV to kV, so you’re ready for anything from microelectronics to heavy duty higher voltage electrical applications. 190 Series III 60 MHz and 100 MHz configurations include VPS421 100:1 probes for higher voltage
applications, while the 200 MHz and 500 MHz configurations include VPS410-II 10:1 probes suitable for both microelectronics and higher voltage applications.
IP-51 rated for harsh environments
Rugged and shock-proof, ScopeMeter Test Tools are built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time you reach for ScopeMeter Test Tool you can be confident it will work reliably wherever your work takes you.
USB and Wi-Fi connectivity
The Fluke 190 Series III offers two USB ports, electrically isolated from measurement input circuits allowing you to quickly and easily transfer data to a PC, archive and share waveforms
with OEMs, colleagues and support staff, or store waveforms, screen captures and instrument
setups onto USB memory devices for later use. Easily transfer saved files via USB stick, direct connection via the USB interface or optional Wi-Fi connectivity. These files can be used for further data handling or in FlukeView-2 Software to study waveforms in greater detail.
Connect-and-View triggering
Connect-and-View triggering provides an instant, stable display without the need for adjusting settings. If you’ve used other scopes, you know how tricky triggering can be. If settings are incorrect, results can be unstable or incorrect. Connect-and-View automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable and repeatable display of virtually any signal including motor drive and control signals. It’s especially fast and convenient when you’re measuring a number of test points in rapid succession.
Built-in digital multimeter
Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter on two channel 190 Series III models. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
TrendPlot paperless recorder— records up to 11 days to help you find intermittent faults
The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, dips, swells and interruptions, or the starting and stopping of a motor can also cause a machine to stop. You may not be around when it happens, but the 190 Series III ScopeMeter Test Tool will be.
Plot minimum and maximum peak values and average over time
Plot any combination of up to four readings including voltages, amps, temperature, frequency and phase for all inputs, all with time and date stamp to pinpoint faultsFluke 190-102-III CAL OffersAccurate and versatile, this portable oscilloscope provides a fast sampling rate of up to 5 GS/s, a 200 ps resolution, and deep memory of 10,000 samples per channel. Perform timing or amplitude-related measurements on three phases or three-axis control systems, or compare and contrast multiple test points in a circuit under test.
Features
Up to four independent floating isolated inputs, up to 1000 V
Up to 5 GS/s real time sampling (depending on model and channels used)
Deep memory: 10,000 points per trace waveform capture (scope mode)
CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
Up to seven hours of battery operation using BP291
Large, bright color display is easy to view in nearly any environment
Easy to store and view historical data and transfer to a PC via USB or Wifi
Convenient battery access door for quick battery swaps in the field
IP51 rating, dust and drip-proof
Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals
Frequency spectrum using FFT-analysis
Automatic capture and REPLAY of 100 screens
ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis
TrendPlot Paperless Recorder mode with deep memory for longterm automatic measurements
5000 count DMM included in the 2-channel models
Applications
Microelectronics
Troubleshooting
Measure from mV to kV safely
Independently isolated inputs allow you to make measurements in mixed circuits having different ground references reducing the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. ScopeMeter 190 Series III test tools are engineered to cover a wide application range from mV to kV, so you’re ready for anything from microelectronics to heavy duty higher voltage electrical applications. 190 Series III 60 MHz and 100 MHz configurations include VPS421 100:1 probes for higher voltage
applications, while the 200 MHz and 500 MHz configurations include VPS410-II 10:1 probes suitable for both microelectronics and higher voltage applications.
IP-51 rated for harsh environments
Rugged and shock-proof, ScopeMeter Test Tools are built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time you reach for ScopeMeter Test Tool you can be confident it will work reliably wherever your work takes you.
USB and Wi-Fi connectivity
The Fluke 190 Series III offers two USB ports, electrically isolated from measurement input circuits allowing you to quickly and easily transfer data to a PC, archive and share waveforms
with OEMs, colleagues and support staff, or store waveforms, screen captures and instrument
setups onto USB memory devices for later use. Easily transfer saved files via USB stick, direct connection via the USB interface or optional Wi-Fi connectivity. These files can be used for further data handling or in FlukeView-2 Software to study waveforms in greater detail.
Connect-and-View triggering
Connect-and-View triggering provides an instant, stable display without the need for adjusting settings. If you’ve used other scopes, you know how tricky triggering can be. If settings are incorrect, results can be unstable or incorrect. Connect-and-View automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable and repeatable display of virtually any signal including motor drive and control signals. It’s especially fast and convenient when you’re measuring a number of test points in rapid succession.
Built-in digital multimeter
Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter on two channel 190 Series III models. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
TrendPlot paperless recorder— records up to 11 days to help you find intermittent faults
The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, dips, swells and interruptions, or the starting and stopping of a motor can also cause a machine to stop. You may not be around when it happens, but the 190 Series III ScopeMeter Test Tool will be.
Plot minimum and maximum peak values and average over time
Plot any combination of up to four readings including voltages, amps, temperature, frequency and phase for all inputs, all with time and date stamp to pinpoint faults
Fluke 190-102-III CAL Specifications
Vertical Deflection
Number of Channels
2
Bandwidth
100 Mhz
Rise Time
3.5 ns
Channel Architecture
All inputs fully insulated from each other and from ground
Inputs may be activated in any combination
Input Coupling
AC or DC, with ground level indicator
Input Sensitivity
With 10:1 probe, 20 mV to 1000 V/div
With 100:1 probe, 200 mV to 10 kV/div
Direct (1:1), 2 mV to 100 V/div
Bandwidth Limiter
20 MHz and 10 kHz
Polarity
Normal, inverted, variable
Vertical Resolution
8 bit
Accuracy at 4 s to 10 μs/div
5 mV/div to 100 V/div, ±(1.5% + 6 counts)
2 mV/div, ±(1.5 % + 10 counts)
Input impedance
1 MΩ (±1 %) // 15 pF (±2.25 pF)
Input Voltage Range
Rated Maximum Floating Voltage
CAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level)
Probe Input Voltage VPS410-II
CAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead)
Probe Input Voltage VPS421
CAT III 1000 V / CAT IV 600 V (maximum voltage between probe tip or reference lead to GND, 2000 V max between probe tip and reference lead)
Maximum BNC Input Voltage
CAT IV 300 V (maximum voltage on BNC input directly)
Maximum Voltage On Meter Input
CAT III 1000 V / CAT IV 600 V (safety designed banana input connectors)
Memory Save and Recall
Memory Locations (Internal)
30 waveform memories plus 10 recording memories plus 9 screen copy memories
30 Waveform Memories
Each memory can contain up to 2 or 4 waveforms plus corresponding setups
10 Recording Memories
Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
External Data Storage
On PC, using FlukeViewâ„¢-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
Screencopies
On PC, using FlukeViewâ„¢-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
Volatility
Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
Real-Time Clock
Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Case
Design
Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard
Kensington lock supported to lock down instrument when left unattended
Drip and Dust Proof
IP 51 according to IEC60529
Shock and Vibration
Shock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (Random), according to MIL-PRF-28800F Class 2
Display Size
5.3 x 3.5″ (133 x 90 mm) LCD
Resolution
1120 pixels x 765 pixels
Brightness
User-adjustable, up to 300 cd/m2
General Specifications
Temperature
Operating: battery discharging: 32 to 104°F (0 to 40°C); battery charging: 0 to 40°C (32 to 104°F)
Storage: -4 to 140°F (-20 to 60°C)
Humidity
32 to 50°F (0 to 10°C): noncondensing
50 to 86°F (10 to 30°C): 95% (±5%)
86 to 104°F (30 to 40°C): 75% (±5%)
104 to 122°F (40 to 50°C): 45% (±5%)
Maximum Operating Altitude
CAT IV 600 V, CAT III 1000 V: up to 6600’ (2000 m)
CAT IV 300 V, CAT III 600 V, CAT II 1000 V: up to 13000’ (4000 m)
Maximum Storage Altitude
40,000’ (12 km)
Interfaces
Two USB-ports provided
Ports are fully insulated from instrument’s floating measurement circuitry
USB-host port directly connects to external flash memory drive (up to 32 GB) for storage of waveform data, measurement results, instrument settings and screen copies
Alternatively, this USB-A port may be used to connect a WiFi Adapter for wireless PC connectivity
A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
Probe Calibration Output
Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel
Generator Output: 1.225 Vpp / 500 Hz square wave
Line Power
Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100 VAC to 240 VAC, ±10%, 50 to 60 Hz
Battery
Power: re-chargeable Li-Ion battery; battery swappable through easily accessible battery door at the rear of the instrument
Type: BP290: 10.8V, 2500 mAh
Charge indicator: battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen
Operating time (with backlight low): up to 3½ using BP290
Charging time: 2½ hours using BP290; 5 hours using BP291
Power saving functions: Auto ‘power down’ with adjustable power down time; automatic ‘display off’ with adjustable power down time; on-screen battery power indicator
Dimensions
10.5 x 7.6 x 2.8″ (265 x 192 x 70 mm)
Weight
4.6 lbs (2.1 kg)
Click here for complete specifications on the Fluke 190-102-III CAL
What’s included with the Fluke 190-102-III CAL
ScopeMeter
Power Adapter
Power Cord Set
Testlead Set
2 x Probe
Handstrap
Hangstrap
USB-Cable
Li-ion Battery Pack
Traceable Certificate of Calibration with Data
User Manual
There are no reviews yet.