Fluke 1630-2 FC OffersEliminate the hazardous and time-consuming process of disconnecting parallel grounds with this earth-ground clamp capable of stakeless measurement. Additionally, this clamp saves time by recording and storing up to 32,760 measured values in memory at the set logging interval.FeaturesTest the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakesAC leakage current measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system–ideal for system troubleshootingRugged: Heavy-duty clamp jaw stays in alignment and calibration even in every day, on-the-job industrial environmentsAlarm threshold: User-defined high/low alarm limits, for rapid measurement evaluationBand-pass filter: Selectable band-pass filter function removes unwanted noise from the ac leakage current measurementLogging measurementsThe earth ground clamp saves time by automatically recording data at pre-set intervalsSaves up to 32,760 measurements in memory at the set logging intervalSaves time by recording and storing measured valuesWireless systemConnects the clamp with an app on your smartphone or tabletYou can save these measurements, and images to cloud storage and share with your teamMaximize uptime and make confident maintenance decisions with data you can trust and traceAccess baseline, historical and current measurements by assetShare your measurement data using video calls and emailsStakeless measurementThe clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don’t have access to soil to place auxiliary test stakes. With this test method, a two-process measurement is made around the earth ground wire or bus bar using the specially-designed jaw of the clamp. Auxiliary test stakes are not used at all. A known voltage is induced by the source in the clamp, and the current is measured by the sensor in the clamp. The tester automatically determines the earth loop resistance for this section of the earthing system.Fluke 1630-2 FC OffersEliminate the hazardous and time-consuming process of disconnecting parallel grounds with this earth-ground clamp capable of stakeless measurement. Additionally, this clamp saves time by recording and storing up to 32,760 measured values in memory at the set logging interval.FeaturesTest the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakesAC leakage current measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system–ideal for system troubleshootingRugged: Heavy-duty clamp jaw stays in alignment and calibration even in every day, on-the-job industrial environmentsAlarm threshold: User-defined high/low alarm limits, for rapid measurement evaluationBand-pass filter: Selectable band-pass filter function removes unwanted noise from the ac leakage current measurementLogging measurementsThe earth ground clamp saves time by automatically recording data at pre-set intervalsSaves up to 32,760 measurements in memory at the set logging intervalSaves time by recording and storing measured valuesWireless systemConnects the clamp with an app on your smartphone or tabletYou can save these measurements, and images to cloud storage and share with your teamMaximize uptime and make confident maintenance decisions with data you can trust and traceAccess baseline, historical and current measurements by assetShare your measurement data using video calls and emailsStakeless measurementThe clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don’t have access to soil to place auxiliary test stakes. With this test method, a two-process measurement is made around the earth ground wire or bus bar using the specially-designed jaw of the clamp. Auxiliary test stakes are not used at all. A known voltage is induced by the source in the clamp, and the current is measured by the sensor in the clamp. The tester automatically determines the earth loop resistance for this section of the earthing system.
Fluke 1630-2 FC Specifications
Maximum Voltage to Earth Ground
1000 V
Frequency Range
40 Hz to 1 kHz
Ingress Protection
IEC/EN 60529: IP30 with jaw closed
LCD
Digital reading: 9999 counts
Refresh rate: 4/s
Overload Indication
OL
Display Reading Specification with Loop Resistance Standard
Input: 0.474 Ω, Minimum: 0.417, Maximum: 0.531
Input: 0.5 Ω, Minimum: 0.443, Maximum: 0.558
Input: 10 Ω, Minimum: 9.55, Maximum: 10.45
Input: 100 Ω, Minimum: 96, Maximum: 104
Data Logging
Capacity: Minimum of 32,760 measurements
Interval: 1 second to 59 minutes and 59 seconds
Wireless Radio
Frequency range: 2412 to 2462 MHz
Output power: <10 mW
Radio frequency certification: FCC ID:T68-FBLE IC:6627A-FBLE
Safety
General: IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1
Measurement: IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V
Current Clamp for Leakage Current Measurements
IEC/EN 61557-13: Class 2, ≤30 A/m
Resistance to Earth
IEC/EN 61557-5
Effectiveness of The Protective Measures
IEC/EN 61557-16: cutoff frequency 20 kHz (-3 dB)
Electromagnetic Compatibility (EMC)
International: IEC/EN 61326-1: Portable Electromagnetic Environment CISPR 11: Group 1, Class B, IEC/EN 61326-2-2
Korea (KCC): Class A equipment (Industrial Broadcast and Communications Equipment)
USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Conductor Size
1.57" (40 mm) approximately
Temperature
Operating: 14 to 122°F (-10 to 50°C)
Storage: -4 to 140°F (-20 to 60°C)
Reference: 73°F ±9°F (23°C ±5°C)
Coefficient: 0.15% X (specified accuracy)/°C (<64.4°F or >82.4°F [<18°C or >28°C])
Operating Humidity
Non condensing: <50°F (<10°C)
≤90% RH at 50 to 86°F (10 to 30°C)
≤75% RH at 86 to 104°F (30 to 40°C)
≤45% RH at 104 to 122°F (40 to 50°C) (Non condensing)
Altitude
Operating: 6561' (2000 m)
Storage: 39370' (12,000 m)
Battery
Type: 4 x 1.5 V AA alkaline IEC/EN LR6
Life: More than 15 hours (In ground resistance measurement mode, with backlight turned off, and RF mode turned off)
Dimensions
11.1 x 4.1 x 1.9" (283 x 105 x 48 mm)
Weight
31 oz (880 g)
Click here for complete specifications on the Fluke 1630-2 FC
What's included with the Fluke 1630-2 FC
Earth Ground Clamp
Loop Resistance Standard
Hard Case
4 x AA Batteries
Safety Information Guide
Quick Reference Guide
One-Year Warranty
There are no reviews yet.