Fluke 1625-2 GEO Earth Ground Tester, -10 to 50°C

Fluke 1625-2 GEO Earth Ground Tester

The Fluke 1625-2 offers simpler, faster earth ground tests than ever before. With internal memory storage of up to 1500 records, accessible via USB port for rapid data transfer and viewing of results. The earth ground tester also gives you world class accessories that take the tedium out of earth ground testing. New wire reels speed up setup and tear down time as much as 50%. Heavy duty stakes can be hammered into dry, hard soil. And new colour-coded wires make setup simple and help eliminate mistakes.

The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall of Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only)

Easy to use, for each test the testers inform you which stakes or clamps need to be connected and the large rotary switch can be used even with a gloved hand.

The Difference

The Fluke 1625-2 is different from its sibling product the 1623-2 in a number of ways. The 1625-2 offers automatic frequency control (AFC) which helps identify existing interference and chooses a measurement frequency to minimize it’s effect.

R* Measurement calculates earth ground impedance at 55Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see. While also offering adjustable limits for quicker testing.

Stakeless Testing:

The 1625-2 is able to measure earth ground loop resistance using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by the clamp and the current is measured using the second clamp. The 1625-2 then automatically determines the resistance of the earth ground rod.

With stakeless testing, the earth ground rod does not need to be disconnected – leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system – a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons or anywhere you don’t have access to soil.Fluke 1625-2 GEO Earth Ground Tester

The Fluke 1625-2 offers simpler, faster earth ground tests than ever before. With internal memory storage of up to 1500 records, accessible via USB port for rapid data transfer and viewing of results. The earth ground tester also gives you world class accessories that take the tedium out of earth ground testing. New wire reels speed up setup and tear down time as much as 50%. Heavy duty stakes can be hammered into dry, hard soil. And new colour-coded wires make setup simple and help eliminate mistakes.

The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall of Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only)

Easy to use, for each test the testers inform you which stakes or clamps need to be connected and the large rotary switch can be used even with a gloved hand.

The Difference

The Fluke 1625-2 is different from its sibling product the 1623-2 in a number of ways. The 1625-2 offers automatic frequency control (AFC) which helps identify existing interference and chooses a measurement frequency to minimize it’s effect.

R* Measurement calculates earth ground impedance at 55Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see. While also offering adjustable limits for quicker testing.

Stakeless Testing:

The 1625-2 is able to measure earth ground loop resistance using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by the clamp and the current is measured using the second clamp. The 1625-2 then automatically determines the resistance of the earth ground rod.

With stakeless testing, the earth ground rod does not need to be disconnected – leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system – a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons or anywhere you don’t have access to soil.

Fluke 1625-2 Specifications

Memory
Internal memory storage up to 1500 records accessible via USB port

Measuring function
Interference voltage and frequency, earthing resistance 3- and 4-pole with/without clip-on current transformer, resistance 2-pole with ac, 2- and 4-pole with dc

Display
4 digit (2999 Digit) – 7 segment liquid crystal display, with improved visibility

Operation
Central rotary switch and function keys

Operating temperature
-10 to 50 °C (14 to 122 °F)

Storage temperature
-30 to 60 °C (-22 to 140 °F)

Temperature coefficient
± 0.1 % of reading/°C <18 °C >28 °C

Type of protection
IP56 for case, IP40 for battery door according to EN60529

Auxiliary power
6 x 1.5 V alkaline (IEC LR6 or type AA)

Dimensions (WxHxD)
250 mm x 133 mm x 187 mm (9.75 in x 5.25 in x 7.35 in)

Weight
< 1.1 kg (2.43 lb) without accessories 7.6 kg (16.8 lb) incl. accessories and batteries in carrying case Case Material Polyester Measuring Range 1 V to 50 V Display Range 0.0 V to 50 V Resolution 0.1 V Frequency Range dc/ac 45 Hz to 400 Hz sine Accuracy ± (5 % of rdg + 5 digit) Measuring sequence Approx. 4 measurements Internal Resistance Approx. 1.5 MΩ Max. overload Urms = 250 V Click here for complete specifications on the Fluke 1625-2 What's included with the Fluke 1625-2 Includes Fluke 1625-2 Tester Batteries Users Manual Quick Reference Guide USB Cable