Fluke 1587FC Offers
The high-performance 2-in-1 insulation digital multimeter
This insulation multimeter is the combination of a digital insulation tester that comes supplied with a full-featured, True RMS digital multimeter in a single compact, handheld unit, which enables maximum versatility for troubleshooting and preventative maintenance.
Features
PI/DAR timed ratio tests
Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
VFD low-pass filter for accurate motor drive measurements
Auto-discharge of capacitive voltage for added user protection
Insulation test of 0.01 MΩ to 2 GΩ
Insulation test voltages of 50, 100, 250, 500 V for many applications
AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
Auto power off to save battery power
CAT III 1000 V, CAT IV 600 V measurement category
Large display with backlight
Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
Keep yourself safe. Find hidden problems faster. Put the paperwork down.
Fluke Connect and this insulation multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily – all at a safe distance.
Add diagnostics with Fluke Connect
Fluke Connect is enabled so you can download the free application to your smartphone and gain additional functions, including:
Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster
Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
Temperature compensation to establish accurate baselines and relevant historical comparisons
Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
Includes live circuit detection to prevent insulation test if voltage >30 V is detected
Provides automated temperature compensation to establish accurate baselines
Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
Includes auto-discharge of capacitive voltage for added user protection
Measures AC/DC voltage, DC millivolts, AC/DC milliamps, resistance, and continuity
Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
REED R2300 Infrared Thermometer
This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752°F (400°C). The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.
Features
Built-in laser pointer identifies target area
User selectable °F or °C
12:1 distance to spot size ratio
Digitally adjustable emissivity
Max and min readings
Backlit display
High and low alarms
Low battery indication and auto shut off
Fluke TPAK Multimeter Hanging Kit
Features
Kit Includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet.
Solves almost any hanging and positioning problem you may face.
The universal hanger allows you to hang your meter on nails, hooks and many other objects.
Compatible with many Fluke instruments
6 Tips for effective insulation testing
1
Disconnect any electronic devices like motor drives, PLC’s, transmitters, etc. before performing insulation testing. Electronics can be damaged by applying higher than normal voltage.
2
The effect of temperature should be considered – it is recommended that tests be performed at a standard conductor temperature of 20 °C (68 °F) or that a temperature baseline is established while compensating future readings by using a DMM with a probe or an infrared thermometer.
3
Select a test voltage appropriate for the insulation being tested. The objective is to stress the insulation but not to over-stress it. When in doubt, use a lower test voltage. It’s usually appropriate to test insulation at twice the voltage it normally sees: for example 460 V to 600 V rated equipment is often tested at 1000 V.
4
When using an insulation tester, leave the leads connected when you stop the test. The insulation tester can discharge any residual test voltage.
5
Conductors that are close to each other have a normal capacitance. This will cause an insulation resistance reading to start low and increase steadily until it stabilizes. This type of increase is normal, but if the reading jumps violently down and up again this indicates arcing.
6
Although the current is tightly limited, an insulation tester can generate sparks and minor but painful burns. The unexpected surprise can cause an operator to jerk away. As always, work away from live systems and use safe work practices when working overhead.
Insulation Resistance Testing Solutions
Using Fluke Thermal Imaging to Troubleshoot Motors & Drives
Infrared cameras, also called thermal imagers, are useful for troubleshooting motor problems as well as for monitoring motor condition for preventative maintenance in power generation, manufacturing and commercial plants. Thermal images of motors reveal their operating condition as indicated by surface temperature. Such condition monitoring is important as a way to avert many unexpected motor malfunctions in systems that are critical to manufacturing. The onset of motor failures can often be detected by a variety of techniques, including vibration, ultrasound and thermal imaging.
In this article, we cover why use thermal imaging and what to scan, as well as some notes on what to look for, including shaft misalignment.
Read the ArticleFluke 1587FC Offers
The high-performance 2-in-1 insulation digital multimeter
This insulation multimeter is the combination of a digital insulation tester that comes supplied with a full-featured, True RMS digital multimeter in a single compact, handheld unit, which enables maximum versatility for troubleshooting and preventative maintenance.
Features
PI/DAR timed ratio tests
Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
VFD low-pass filter for accurate motor drive measurements
Auto-discharge of capacitive voltage for added user protection
Insulation test of 0.01 MΩ to 2 GΩ
Insulation test voltages of 50, 100, 250, 500 V for many applications
AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
Auto power off to save battery power
CAT III 1000 V, CAT IV 600 V measurement category
Large display with backlight
Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
Keep yourself safe. Find hidden problems faster. Put the paperwork down.
Fluke Connect and this insulation multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily – all at a safe distance.
Add diagnostics with Fluke Connect
Fluke Connect is enabled so you can download the free application to your smartphone and gain additional functions, including:
Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
PI/DAR timed ratio tests with TrendIt™ graphs to identify moisture and contaminated insulation problems faster
Memory storage through Fluke Connect that saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
Temperature compensation to establish accurate baselines and relevant historical comparisons
Historical tracking and trending of assets to identify insulation degradation over time and allow real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
Includes live circuit detection to prevent insulation test if voltage >30 V is detected
Provides automated temperature compensation to establish accurate baselines
Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
Includes auto-discharge of capacitive voltage for added user protection
Measures AC/DC voltage, DC millivolts, AC/DC milliamps, resistance, and continuity
Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
REED R2300 Infrared Thermometer
This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752°F (400°C). The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.
Features
Built-in laser pointer identifies target area
User selectable °F or °C
12:1 distance to spot size ratio
Digitally adjustable emissivity
Max and min readings
Backlit display
High and low alarms
Low battery indication and auto shut off
Fluke TPAK Multimeter Hanging Kit
Features
Kit Includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet.
Solves almost any hanging and positioning problem you may face.
The universal hanger allows you to hang your meter on nails, hooks and many other objects.
Compatible with many Fluke instruments
6 Tips for effective insulation testing
1
Disconnect any electronic devices like motor drives, PLC’s, transmitters, etc. before performing insulation testing. Electronics can be damaged by applying higher than normal voltage.
2
The effect of temperature should be considered – it is recommended that tests be performed at a standard conductor temperature of 20 °C (68 °F) or that a temperature baseline is established while compensating future readings by using a DMM with a probe or an infrared thermometer.
3
Select a test voltage appropriate for the insulation being tested. The objective is to stress the insulation but not to over-stress it. When in doubt, use a lower test voltage. It’s usually appropriate to test insulation at twice the voltage it normally sees: for example 460 V to 600 V rated equipment is often tested at 1000 V.
4
When using an insulation tester, leave the leads connected when you stop the test. The insulation tester can discharge any residual test voltage.
5
Conductors that are close to each other have a normal capacitance. This will cause an insulation resistance reading to start low and increase steadily until it stabilizes. This type of increase is normal, but if the reading jumps violently down and up again this indicates arcing.
6
Although the current is tightly limited, an insulation tester can generate sparks and minor but painful burns. The unexpected surprise can cause an operator to jerk away. As always, work away from live systems and use safe work practices when working overhead.
Insulation Resistance Testing Solutions
Using Fluke Thermal Imaging to Troubleshoot Motors & Drives
Infrared cameras, also called thermal imagers, are useful for troubleshooting motor problems as well as for monitoring motor condition for preventative maintenance in power generation, manufacturing and commercial plants. Thermal images of motors reveal their operating condition as indicated by surface temperature. Such condition monitoring is important as a way to avert many unexpected motor malfunctions in systems that are critical to manufacturing. The onset of motor failures can often be detected by a variety of techniques, including vibration, ultrasound and thermal imaging.
In this article, we cover why use thermal imaging and what to scan, as well as some notes on what to look for, including shaft misalignment.
Read the Article
Fluke 1587 FC-KIT Specifications
AC Voltage Measurements
Range
600 mV
6 V
60 V
600 V
1000 V
Resolution
0.1 mV
0.001 V
0.01 V
0.1 V
1 V
50 to 60 Hz ±(% of Rdg + counts)
±(1% + 3)
±(1% + 3)
±(1% + 3)
±(1% + 3)
±(2% + 3)
60 to 5000 Hz ±(% of Rdg + counts)
±(2% + 3)
±(2% + 3)
±(2% + 3)
±(2% + 3)1
±(2% + 3)1
Low-Pass Filter Voltage
Range
600 mV
6 V
60 V
600 V
1000 V
Resolution
0.1 mV
0.001 V
0.01 V
0.1 V
1 V
50 to 60 Hz ±(% of Rdg + counts)
±(1% + 3)
±(1% + 3)
±(1% + 3)
±(1% + 3)
±(2% + 3)
60 to 400 Hz ±(% of Rdg + counts)
±(2% + 3) – (6% – 3)
±(2% + 3) – (6% – 3)
±(2% + 3) – (6% – 3)
±(2% + 3) – (6% – 3)
±(2% + 3) – (6% – 3)
DC Voltage Measurement
Range
6 V dc
60 V dc
600 V dc
1000 V dc
Resolution
0.001 V
0.01 V
0.1 V
1 V
Accuracy ±(% of Rdg + Counts)
±(0.09% + 2)
±(0.09% + 2)
±(0.09% + 2)
±(0.09% + 2)
Input Impedance
10 MΩ (nominal), <100 pF
Nominal Mode Rejection Ratio
>60 dB at 50 or 60 Hz
Common Mode Rejection Ratio
>120 dB at dc, 50 or 60 Hz (1 k unbalance)
DC Millivolts Measurement
Range
600 mVdc
Resolution
0.1 mV
Accuracy ±(% of Rdg + Counts)
±(0.1 + 1)
DC and AC Current Measurement
Range
400 mA
Resolution
0.1 mA
Accuracy ±(% of Rdg+Counts)
±(1.5% + 2)1
Burden Voltage (Typical)
2 mV/mA
Range
60 mA
Resolution
0.01 mA
Accuracy ±(% of Rdg+Counts)
±(1.5% + 2)1
Burden Voltage (Typical)
2 mV/mA
DC
Range
400 mA
Resolution
0.1 mA
Accuracy ±(% of Rdg+Counts)
±(0.2% + 2)
Burden Voltage (Typical)
2 mV/mA
Range
60 mA
Resolution
0.01 mA
Accuracy ±(% of Rdg+Counts)
±(0.2% + 2)
Burden Voltage (Typical)
2 mV/mA
Overload
600 mA for 2 minutes maximum
Fuse Protection for mA Input
0.44 mA, 1000 V, IR 10 kA
AC Conversion
Inputs are ac-coupled and calibrated to the rms value of sine wave input
Ohms Measurement
Range
600 Ω
6 kΩ
60 kΩ
600 kΩ
6 MΩ
50 MΩ
Resolution
0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ
Accuracy +(% of Rdg+Counts)1
±(0.9% + 2)
±(0.9% + 2)
±(0.9% + 2)
±(0.9% + 2)
±(0.9% + 2)
±(1.5% + 3)
Overload Protection
1000 rms or dc
Open Circuit Test Voltage
<8 V dc
Short Circuit Current
<1.1 mA
Diode Test
Diode Test Indication
Display voltage drop: 0.6 V at1.0 mA nominal test current
Accuracy
±(2% + 3)
Continuity Test
Continuity Indication
Continuous audible tone for testresistance below 25 Ω and off above 100 Ω
Maximum reading: 1000 Ω
Open Circuit Voltage
<8.0 V
Short Circuit Current
1.0 mA typical
Overload Protection
1000 V rms
Response Time
>1 m sec
Frequency Measurement
Range
99.99 Hz
999.9 Hz
9.999 kHz
99.99 kHz
Resolution
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
Accuracy ±(% of Rdg+Counts)
±(0.1% + 1)
±(0.1% + 1)
±(0.1% + 1)
±(0.1% + 1)
Frequency Counter Sensitivity
600.0 mV ac
V ac Sensitivity (RMS Sine Wave)1 5 Hz to 20 kHz: 100.0 mV
V ac Sensitivity (RMS Sine Wave)1 20 to 100 kHz: 150.0 mV
DC Trigger Levels¹ to 20 kHz2: NA
6.0 V
V ac Sensitivity (RMS Sine Wave)1 5 Hz to 20 kHz: 1.0 V
V ac Sensitivity (RMS Sine Wave)1 20 to 100 kHz: 1.5 V
DC Trigger Levels¹ to 20 kHz2: -400.0 mV and 2.5 V
60.0 V
V ac Sensitivity (RMS Sine Wave)1 5 Hz to 20 kHz: 10.0 V
V ac Sensitivity (RMS Sine Wave)1 20 to 100 kHz: 36.0 V
DC Trigger Levels¹ to 20 kHz2: 1.2 V and 4.0 V
600.0 V
V ac Sensitivity (RMS Sine Wave)1 5 Hz to 20 kHz: 100.0 V
V ac Sensitivity (RMS Sine Wave)1 20 to 100 kHz: NA
DC Trigger Levels¹ to 20 kHz2: 12.0 V and 40.0 V
1000.0 V
V ac Sensitivity (RMS Sine Wave)1 5 Hz to 20 kHz: 300.0 V
V ac Sensitivity (RMS Sine Wave)1 20 to 100 kHz: NA
DC Trigger Levels¹ to 20 kHz2: 12.0 V and 40.0 V
Capacitance
Range
1000 nF
10.00 µF
100.0 µF
9999 µF
Resolution
1 nF
0.01 µF
0.1 µF
1 µF
Accuracy ±(% of Rdg+Counts)
±(1.2% + 2)
±(1.2% + 2)
±(1.2% ± 90 counts)
±(1.2% ± 90 counts)
Temperature Measurement
Range
-40 to 998°F (-40 to 537°C)
Resolution
0.1°F (0.1°C)
Accuracy ±(% of Rdg+Counts)1
±(1% + 10 counts)
±(1% + 18 counts)
Insulation Specifications
Measurement Range
0.01 MΩ to 2 GΩ
Test Voltages
50, 100, 250, 500, 1000 V
Test Voltage Accuracy
20%, 0%
Short-Circuit Test Current
1 mA nominal
Auto Discharge
Discharge time <0.5 second for C=1 µF or less
Live Circuit Detection
Inhibit test if terminal voltage >30 V prior to initialization of test
Maximum Capacitive Load
Operable with up to 1 µF load
Output Voltage
50 V (0% to +20%)
Display range: 0.01 to 6.00 MΩ
Resolution: 0.01 MΩ
Test current: 1 mA at 50 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
Display range: 6.0 to 50.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 50 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
100 V (0% to +20%)
Display range: 0.01 to 6.00 MΩ
Resolution: 0.01 MΩ
Test current: 1 mA at 100 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
Display range: 6.0 to 60.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 100 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
Display range: 6.0 to 100.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 100 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
250 V (0% to +20%)
Display range: 0.1 to 60.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 250 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
Display range: 60 to 250 MΩ
Resolution: 1 MΩ
Test current: 1 mA at 250 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
500 V (0% to +20%)
Display range: 0.1 to 60.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 500 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
Display range: 60 to 500 MΩ
Resolution: 1 MΩ
Test current: 1 mA at 250 kΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
1000 V (0% to +20%)
Display range: 0.1 to 60.0 MΩ
Resolution: 0.1 MΩ
Test current: 1 mA at 1 MΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
Display range: 60 to 600 MΩ
Resolution: 1 MΩ
Test current: 1 mA at 1 MΩ
Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
Display range: 0.6 to 2.0 GΩ
Resolution: 100 MΩ
Test current: 1 mA at 1 MΩ
Resistance accuracy ±(% of Rdg + Counts): ±(10% + 3 counts)
Click here for complete specifications on the Fluke 1587 FC-KIT
This Fluke 1587FC-KIT Multimeter Kit Includes
Fluke 1587 FC Insulation Multimeter
Perform insulation tests with voltages 50V, 100V, 250V, 500V, 1000V. Capable of testing frequency, capacitance, temperature, AC/DC voltage and more. Part of the Fluke Connect family of wireless test tools.
REED R2300 Infrared Thermometer
Fast responding entry-level infrared thermometer with min/max temperature readings and adjustable high/low temperature alarms.
Fluke TPAK Meter Hanging Kit
Attaches to back of a Fluke 110/170/180 Series Meter, 20/70-III with integrated holster (with adapter), 724/725, and 50 Series II.
What’s included with the Fluke 1587 FC-KIT
Insulation Multimeter
Remote Probe
Test Leads
Alligator Clips
K-Type Thermocouple
Carrying Case
User Documentation
Two in one tools
Stand-alone tools
Insulation test features
1587 FC
1577
1503
1507
1550C
1555
Test voltages
50 V, 100 V, 250 V, 500 V, 1000 V
500 V, 1000 V
500 V, 1000 V
50 V, 100 V, 250 V, 500 V, 1000 V
250 V to 5000 V
250 V to 10,000 V
Insulation resistance range
0.01 MΩ to 2 GΩ
0.01 MΩ to 600 GΩ
0.01 MΩ to 2000 GΩ
0.01 MΩ to 10 GΩ
250 kΩ to 1 TΩ
250 kΩ to 2 TΩ
PI/DAR
Auto discharge
Timed ramp test (Breakdown)
Pass/fail comparison
Est. # of IRT tests
1000
1000
2000
2000
Various
Various
Voltage > 30 V warning
Memory
With Fluke Connect App
Remote test probe
Lo ohms/earth-bond continuity
200 mA source (10 mΩ resolution)
200 mA source (10 mΩ resolution)
Display
Digital LCD
Digital LCD
Digital LCD
Digital LCD
Digital LCD/ analog display
Digital LCD/ analog display
Hold/lock
Multimeter features
AC/DC volts
Note: Not all product features and specifications are listed in this table. For more complete information, see individual product data sheets.
Footnotes:
1. Function useful for checking connections and motor windings. Also useful for users who are required to perform earth-bond continuity measurements during installation testing.
2. Filter for variable-speed motor drive measurements.
Current
Resistance
Continuity beeper
Temperature (contact)
Lo-pass filter2
Capacitance
Diode test
Frequency
MIN/MAX
Other features
Backlight
Software
Fluke Connect compatible
FlukeView® Forms Basic
Fluke View® Forms Basic
Battery
4 AA (NEDA 15A or IEC LR6)
4 AA (NEDA 15A or IEC LR6)
4 AA (NEDA 15A or IEC LR6)
4 AA (NEDA 15A or IEC LR6)
Rechargeable
Rechargeable
Find out more about insulation testing
See it. Save it. Share it. All the facts, right in the field.
Fluke engineers have delivered an innovative mobile platform and tool that helps solve everyday problems, allowing you to instantly document measurements, retrieve historical data, and share live measurements with your team. All handled by the Android™ or iOS smart phone you already carry.
Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is works with over 20 different Fluke products – the largest suite of connected test tools in the world.
Make the best decisions faster than ever before by viewing temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.
Fluke Connect Features:
TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly.
EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup.
ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere.
AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup.
Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime.
Fluke Connect Benefits:
Maximize uptime
Minimize maintenance costs
Better assessments with accurate records
Higher efficiency with less walking around; no notebook and excel needed
Share troubleshooting knowledge live
Create and share helpful content in the field
Access to Fluke digital product manuals means no need to carry manuals in the field
Keep organized manually entered measurements
Why you need the Fluke 1587 FC Insulation Multimeter
Insulation multimeters are an integrated tool for maintaining and troubleshooting motor systems, electrical distribution, and production equipment. Carrying the Fluke 1587 FC will enable you to test insulation more often, making your maintenance tests more thorough and your troubleshooting more effective.
This multimeter combines a TRMS digital multimeter and a digital insulation tester in a single, compact unit. For this reason, it is capable of measuring a higher resistance than the average multimeter; allowing you to know when a cable is leaking under high voltage – see 0:25.
Its compatibility with Fluke Connect® makes it even more of an asset in your toolbox! Find out why at 0:58.
Fluke 1587 FC Tips and Tricks: Low-Pass Filter
Get step-by-step instructions on using a VFD drive and the 1587 FC. By connecting the unit to a smartphone or tablet via Bluetooth, you can see your measurements in current time.
How To Test a Motor with the Fluke 1587 FC Insulation Meter
Use the Fluke Connect App to save the measurements taken for a later date. To test a motor, follow the simple step-by-step instructions provided in the video. You’ll complete a motor test in no time at all.
How To Take Insulation Resistance Measurements with the Fluke 1587FC
This video will teach the viewers how to take insulation resistance measurements with this insulation multimeter. It also shows the viewers where functions that relate to insulation resistance are on the device. Additionally, this test instrument is Fluke Connect compatible.
There are no reviews yet.