Specifications
OVERVIEW
| UPC Code | 037332126948 |
INPUT
| Nominal Input Voltage(s) Supported | 120V AC |
| Maximum Input Amps / Watts | DC INPUT: Full continuous load – 72A at 12V DC. AC INPUT: 8.4 amps at 120VAC with full inverter and charger load (1.4A max charger-only) |
| Recommended Electrical Service | DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity – DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended |
| Input Connection Type | DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug |
| Voltage Compatibility (VAC) | 120 |
| Voltage Compatibility (VDC) | 12 |
OUTPUT
| Frequency Compatibility | 60 Hz |
| Pure Sine Wave Output | No |
| Output (Watts) | 700 |
| Nominal Output Voltage(s) Supported | 120V |
| Output Receptacles | (1) 5-15R |
| Continuous Output Capacity (Watts) | 700 |
| Peak Output Capacity (Watts) | 1400 |
| Output Voltage Regulation | LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%). |
| Output Frequency Regulation | 60 Hz (+/- 0.3 Hz) |
| Overload Protection | Includes 7A output breaker for AC output loads |
BATTERY
| Expandable Battery Runtime | Runtime is expandable with any number of user supplied wet, gel or SLA type batteries |
| Expandable Runtime | Yes |
| DC System Voltage (VDC) | 12 |
| Battery Charge | 6A max, steps down to float level to maintain |
USER INTERFACE, ALERTS & CONTROLS
| Front Panel LEDs | 6 diagnostic LEDs indicate battery voltage level (high, medium & low) and operation (line, inverter, load) |
| Switches | 3 position DC off, auto (inverter or AC) and charge-only switch enables simple operation |
SURGE / NOISE SUPPRESSION
| AC Suppression Joule Rating | 300 |
PHYSICAL
| Material of Construction | Aluminum |
| Cooling Method | Multi-speed fan |
| Form Factors Supported | Integrated mounting feet for easy installation |
| Shipping Dimensions (hwd / in.) | 8.50 x 14.50 x 8.50 |
| Shipping Weight (lbs.) | 5.50 |
| Unit Weight (lbs.) | 4 |
ENVIRONMENTAL
| Relative Humidity | 0-95% non-condensing |
LINE / BATTERY TRANSFER
| Transfer Time (Line Power to Battery Mode) | 16.6 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications) |
| Low Voltage Transfer to Battery Power | In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 85V (user adjustable to 85, 95V – see manual) |
| High Voltage Transfer to Battery Power | In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 139V |
WARRANTY & SUPPORT
| Product Warranty Period (U.S. & Canada) | 1-year limited warranty |
There are no reviews yet.