Fluke 373 True RMS AC Clamp Meter, 600 A

Fluke 373 OffersThe Fluke 373 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 373 can read up to 600 V ac and 600 A in ac and dc modes.

Key Features

True-RMS and state of the art signal processing allows for use in noisy electrical environments while providing stable readings on non-linear signals
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change positions while taking a measurement
Capacitance for troubleshooting start and run motor capacitors.

The Fluke 373 is part of Fluke’s new Clamp Meter line that includes: 381, 376, 375, 374 & 365.

Replacing the Fluke 334

The Fluke 373 clamp meter is the direct replacement for the Fluke 334 clamp meter. The Fluke 373 includes all the features of the 334 (except inrush), but also includes:

CAT IV 300, CAT III 600 V
True-RMS
1000 μFFluke 373 OffersThe Fluke 373 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 373 can read up to 600 V ac and 600 A in ac and dc modes.

Key Features

True-RMS and state of the art signal processing allows for use in noisy electrical environments while providing stable readings on non-linear signals
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change positions while taking a measurement
Capacitance for troubleshooting start and run motor capacitors.

The Fluke 373 is part of Fluke’s new Clamp Meter line that includes: 381, 376, 375, 374 & 365.

Replacing the Fluke 334

The Fluke 373 clamp meter is the direct replacement for the Fluke 334 clamp meter. The Fluke 373 includes all the features of the 334 (except inrush), but also includes:

CAT IV 300, CAT III 600 V
True-RMS
1000 μF

Fluke 373 Specifications

AC Current

Range
600.0 A

Resolution
0.1 A

Accuracy
2% ± 5 digits (48 to 62 Hz)

Crest Factor (50/60 Hz)
2.5 at 600 A

AC Voltage

Range
600.0 V

Resolution
0.1 V

Accuracy
1.0% ± 5 digits (48 to 62 Hz)

DC Voltage

Range
600.0 V

Resolution
0.1 V

Accuracy
1% ± 5 digits

Resistance

Range
600.0/6000 Ω

Resolution
0.1/1 Ω

Accuracy
1% ± 5 digits

Continuity Beeper
30 Ω

Capacitance

Range
10.0 to 100.0 μF/1000 μF

Resolution
0.1/1 μF

Accuracy
1.9% ± 2 digits

Environmental Specifications

Operating Temperature
14 to 122°F (-10 to 50°C)

Storage Temperature
-40 to 140°F (-40 to 60°C)

Operating Humidity
Non condensing at 50°F (<10°C) ≤90% RH at 50 to 86°F (10 to 30°C) ≤75% RH at 86 to 104°F (30 to 40°C) ≤45% RH at 104 to 122°F (40 to 50°C) (Without condensation) Operating Altitude 9842.52' (3000 m) Storage Altitude 39,370.1' (12,000 m) EMI, EMC Meets all applicable requirements in EN61326-1:2006 Temperature Coefficients Add 0.1 x specified accuracy for each °C above 28°C or below 18°C Safety Compliance ANSI/ISA S82.02.01:2004 CAN/CSA-C22.2 No. 61010-1-04 IEC/EN 61010-1:2001, 600V CAT III, 300V CAT IV Pollution Degree 2 EN/IEC 61010-2-32:2002 EN/IEC 61010-031:2002/A1:2008 General Specifications Batteries 2 x AA NEDA 15 A IEC LR6 Dimensions 9.1 x 3.35 x 1.8" (232 x 85 x 45 mm) Weight 0.82 lbs (370 g) Click here for complete specifications on the Fluke 373 What's included with the Fluke 373 Clamp Meter Test Leads Carrying Case 5 x AA Alkaline Batteries Coated Instruction Card Safety Information Sheet Users Manual