Product Description
Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid unnecessary battery recharging, saving on fuel and long-term maintenance costs.
If you already have a Magnum Inverter/Charger and Magnum Remote*, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the “Meter” button on your ME-RC.
ME-BMK Specifications ME-BMK DC volts 7 to 70 (±0.5%) auto voltage detection DC amps ±0.1 to 999 (±1.0%) Battery SOC % 0 to 100% (1% increments) Power draw < .6 watts Amp hours in/out ±32,768 amp hours (1 AH increments) rAH out (resettable amp hours removed) 0 to 65,535 amp hours, resettable (0.1 AH increments) tAH out (total amp hours removed) 0 to 65,535,000 amp hours (0.1 k or 100 AH increments) Minimum/maximim DC 7 to 70 VDC, resettable Shipping weight 2 lb (.9 kg) Kit includes Manual, sense module, DC shunt, twisted pair wire, and communication cable Sense wire Twisted pair –blue & orange, 5’ length, 18 AWG wire Communication cable 4-conductor, 10’ twisted pair, telephone standard Remote requirements Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)
DC Shunt (not included with the ME-BMK-NS kit) Resistance 0.1 milliohm (500A at 50mV) Continuous current 410 amperes maximum Overload current Overloads to 500 amps for less than 5 minutes if normally operated at less than 300 amps
There are no reviews yet.