Specifications
OVERVIEW
| UPC Code | 037332095985 |
INPUT
| Nominal Input Voltage(s) Supported | 230V AC |
| Maximum Input Amps / Watts | DC INPUT: Full continuous load – 114A at 36VDC. AC INPUT: 26 amps at 230VAC with full inverter and charger load (10.4A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points – see manual for setting instructions) |
| Recommended Electrical Service | DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended. |
| Input Connection Type | DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate |
| Voltage Compatibility (VAC) | 230 |
| Voltage Compatibility (VDC) | 36 |
OUTPUT
| Frequency Compatibility | 50 Hz |
| Pure Sine Wave Output | No |
| Output (Watts) | 3600 |
| Nominal Output Voltage(s) Supported | 230V |
| Output Receptacles | Hardwire |
| Continuous Output Capacity (Watts) | 3600 |
| Peak Output Capacity (Watts) | 7200 |
| Output Voltage Regulation | LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%). |
| Output Frequency Regulation | 50 Hz (+/- 0.3 Hz) |
| Overload Protection | Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads. |
BATTERY
| Expandable Battery Runtime | Runtime is expandable with any number of user supplied wet or gel type batteries |
| Expandable Runtime | Yes |
| DC System Voltage (VDC) | 36 |
| Battery Pack Accessory (Optional) | Â 98-121Â sealed lead acid battery (optional) |
| Battery Charge | 30-amp high/7.5-amp low |
VOLTAGE REGULATION
| Voltage Regulation Description | Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels |
| Overvoltage Correction | Over-voltages are automatically reduced by 10% |
| Brownout Correction | Brownouts are automatically boosted by 10% |
USER INTERFACE, ALERTS & CONTROLS
| Front Panel LEDs | Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. |
| Switches | 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, “auto/remote” setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads. |
PHYSICAL
| Material of Construction | Polycarbonate |
| Cooling Method | Multi-speed fan |
| Form Factors Supported | Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
| Shipping Dimensions (hwd / cm) | 34.04 x 36.83 x 53.09 |
| Shipping Weight (kg) | 29.30 |
| Unit Dimensions (hwd / cm) | 17.78 x 21.59 x 35.56 |
| Unit Weight (kg) | 26.31 |
ENVIRONMENTAL
| Relative Humidity | 0-95% non-condensing |
LINE / BATTERY TRANSFER
| Transfer Time (Line Power to Battery Mode) | 20 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications) |
| Low Voltage Transfer to Battery Power | In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182V – see manual) |
| High Voltage Transfer to Battery Power | In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 – see manual) |
FEATURES & SPECIFICATIONS
| Load Sensing | Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts. |
STANDARDS & COMPLIANCE
| Product Compliance | RoHS |
WARRANTY & SUPPORT
| Product Warranty Period (International) | 2-year limited warranty |
There are no reviews yet.